Review of Bandit 15
Basic specs..
The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season. And outside the sailing season, just bottom cleaning and perhaps anti-fouling painting once a year - a few hours of work, that's all.
The boat equipped with a fractional rig. A fractional rig has smaller headsails which make tacking easier, which is an advantage for cruisers and racers, of course. The downside is that having the wind from behind often requires a genaker or a spinnaker for optimal speed.
CentreBoard
The Bandit 15 is equipped with a centreboard keel. A centreboard keel is a pivoting lifting keel, allowing to sail both coastal and inland waters.
The boat can sail close to the beach as the draft is just 0.18 - 0.28 meter (0.59 - 0.89 ft) dependent of the load. See immersion rate below.
Sailing characteristics
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Bandit 15 is about 55 kg/cm, alternatively 308 lbs/inch. Meaning: if you load 55 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 308 lbs cargo on the boat it will sink 1 inch.
Sailing statistics
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
Maintenance
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Bandit 15 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us . Criticism helps us to improve.
- Forums New posts Unanswered threads Register Top Posts Email
- What's new New posts New Posts (legacy) Latest activity New media
- Media New media New comments
- Boat Info Downloads Weekly Quiz Topic FAQ 10000boatnames.com
- Classifieds Sell Your Boat Used Gear for Sale
- Parts General Marine Parts Hunter Beneteau Catalina MacGregor Oday
- Help Terms of Use Monday Mail Subscribe Monday Mail Unsubscribe
Bandit 15 (by MFG)
- Thread starter Gary Thomas
- Start date Jan 31, 2006
- Forums for All Owners
- Ask All Sailors
Gary Thomas
I have recently been offered a 15"Bandit( #385)in pretty poor condition for reconstruction. The boat owner had been deceased for about six years, and I am having trouble finding anything out about the boat. Is there anyone out there that could aid me in finding 1. Information on 2. Parts available? 3. From whom? Thank you! Gary Thomas
Mike M16608
Made in Ashtabula Ohio Hi Gary,I moved up to a H23 and still have my MFG 19. I did find some really basic stuff on the web by a guy who tried to start an owners group - but it was really nothing more than a copy of an old brochure.
- This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register. By continuing to use this site, you are consenting to our use of cookies. Accept Learn more…
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
- Sailboat Guide
MFG Boat Company
A division of MFG (Molded Fiberglass Corporation), the original contractor for the fiberglass body of the Chevrolet Corvette, based in Ohio, USA. The founder, Robert S. Morrison, apparently never wished to build, or certain SELL boats. But when a proposal to build fiberglass hulls for the Lyman (power) Boat company fell through, a Boat division (located at Union City, PA), was formed. The lineup consisted primarily of small powerboats. (MFG made power boats for Sears and Roebuck for many years.) The origins of the sail boat division are unclear. Some (early) boats are listed as being built by Anchor Reinforced Plastics. The address listing for Anchor Reinforced Plastics was Hazel Park, MI. In 1965 The company was offering the WHISTLER, PINTAIL, and TEAL under the ‘Anchor Sailboat Division’. Later the name seems to have changed to ‘SailMFG’ when the company bought the Gibbs Boat company in the early 1970’s.(At this time located in Lasalle, Michigan, USA.)
Associations
- Shark Catamaran Association
- MFG Sailboats
- F. S. Ford Jr.
- Hendricks Bulthuis
- J.R. (Rod) Macalpine-Downie
14 sailboats built by MFG Boat Company
Shark Catamaran
Copperhead 14.
Sidewinder 16
Whistler 11
- About Sailboat Guide
©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
- Most Popular Categories
- Boat Covers
- Boat Propellers
- Bimini Tops
- Boat Motors & Parts
- Boat Motors
- Boat Seats & Pontoon Furniture
- All Categories »
- Boats for Sale
- Boating Forums
1977 MFG Bandit 15
Parts, Accessories & Upgrades to Consider:
Would these parts and accessories improve your boating and experience, related links.
- Insure my MFG Boat
- Sell my MFG Boat
- Boat loan quotes
Parts & Accessories
- Anchoring & Docking
- Cabin & Galley
- Boat Hardware
- Boat Seats & Furniture
- Boat Windshields
- Controls & Steering
- Covers & Tops
- Fishing Equipment
- Fuel Tanks & Systems
- Inflatable Boats
- Life Jackets
- Maintenance & Boat Repair
- Manuals & Books
- Marine Electrical
- Marine Electronics
- Marine Engine Parts
- Nautical Gifts
- Plumbing & Pumps
- Trailers & Parts
- Trolling Motors
- Videos, CDs & Software
- Watersports
STAY CONNECTED
Sign up for our Newsletter to Receive the Latest Deals, News and More.
OUR COMPANY
Explore iboats, connect with us.
| |
|
IMAGES
COMMENTS
It takes into consideration "reported" sail area, displacement and length at waterline. The higher the number the faster speed prediction for the boat. A cat with a number 0.6 is likely to sail 6kts in 10kts wind, a cat with a number of 0.7 is likely to sail at 7kts in 10kts wind. KSP = (Lwl*SA÷D)^0.5*0.5
Bandit 15 is a 15′ 3″ / 4.7 m monohull sailboat designed by J.R. (Rod) Macalpine-Downie and Dick Gibbs and built by MFG Boat Company starting in 1972.
If you are a boat enthusiast looking to get more information on specs, built, make, etc. of different boats, then here is a complete review of BANDIT 15. Built by MFG Boat Company (USA) and designed by J.R. (Rod) Macalpine-Downie, the boat was first built in 1972. It has a hull type of Centerboard Dinghy and LOA is 4.65.
The Bandit 15 is equipped with a centreboard keel. A centreboard keel is a pivoting lifting keel, allowing to sail both coastal and inland waters. The boat can sail close to the beach as the draft is just 0.18 - 0.28 meter (0.59 - 0.89 ft) dependent of the load. See immersion rate below.
1980 MFG Bandit 15. This MFG Bandit 15 sailboat has a fiberglass hull and an LOA of 15.25 feet (length over all). The boat has a 511 inch beam. This sailboat is set up to sail as a Sloop. The craft has 130 square feet of sail area. Displacement for the boat is 365 lbs. The draft of this sailboat is approximately 3'11".
1977 Bandit 15 by MFG, a long-time boat builder. Dark Blue hull with cream deck and interior. Excellent condition both in appearance and rigging as well as sails. Roller furling jib that really works. Six foot beam with 130 sq ft of sail. Dilley trailer with near-new tires, spare, bearing buddies and wheeled tongue jack.
1976 MFG Bandit 15. This MFG sailboat has a hull made of fiberglass and has an overall length of 15.25 feet. The beam (or width) of this craft is 511 inches. This sailboat is rigged as a Sloop. The sail area for the boat is 130 square feet. Approximate displacement for the vessel comes in at around 365 pounds.
1978 Sail Mfg BANDIT 15 Standard Equipment, Boat Value, Boat Price & Craft Specs | J.D. Power
Take advantage of real dealer pricing and shop special offers on new and used boats. Select your boat to get started. A boat's history affects it's value—check the history of this 1977 Sail Mfg and avoid buying a previously damaged boat. Check for storm damage, accidents, loss, theft, registration ...
Bandit 15 (by MFG) Thread starter Gary Thomas; Start date Jan 31 ... Status Not open for further replies. G. Gary Thomas. Jan 31, 2006 #1 I have recently been offered a 15"Bandit( #385)in pretty poor condition for reconstruction. ... in pretty poor condition for reconstruction. The boat owner had been deceased for about six years, and I am ...
1977 Sail Mfg BANDIT 15 Prices and Specs. Select Options. Price with Standard Equipment. Standard equipment includes the features that come with this vehicle. Select Your Options. Choose options to include in this vehicle value. Next. Model Notes Sail Mfg Note. No longer in production. No weight and beam information available.
MFG Boat Company. USA 1965 — 1983. Overview. A division of MFG (Molded Fiberglass Corporation), the original contractor for the fiberglass body of the Chevrolet Corvette, based in Ohio, USA. The founder, Robert S. Morrison, apparently never wished to build, or certain SELL boats. ... Bandit 15. 1972 • 15 ...
The 1977 MFG Bandit 15 sailboat has a fiberglass hull and has an overall length of 15.25 feet (sometimes referred to as LOA). The width (or beam) of this craft is 511 inches. This boat is rigged as a Sloop. The sail area for the sailboat is 130 square feet. The displacement for the boat is approximately 365 lbs.
MFG Sailboats. Excellent site with some interesting historical background of the company. ... BANDIT 15: 15.25 ft / 4.65 m: 1972: BANDIT 17: 17.00 ft / 5.18 m: 1972: COPPERHEAD 14: 13.75 ft / 4.19 m: 1970: DINGO 15: 14.92 ft / 4.55 m: 1963: FORD 20:
1976 MFG Bandit 15 for sale, Alburg, Vermont (near Lake Champlain), $1,000. 8/7/06, 1976 MFG Bandit 15, Alburg, Vermont (near Lake Champlain), $1,000, sold 11/15/06 ... Contact: Free Sailboat Ad: Go to Sailing Texas classifieds for current sailboats for sale . 1976 MFG Bandit 15 15 ft day sailer with trailer cream interior with brown exterior ...
A division of MFG (Molded Fiberglass Corporation), the original contractor for the fiberglass body of the Chevrolet Corvette, based in Ohio, USA. The founder, Robert S. Morrison, apparently never wished to build, or certain SELL boats. But when a proposal to build fiberglass hulls for the Lyman (power) Boat company fell through, a Boat division (located at Union City, PA), was formed. The ...
Easy-to-sail SailMFG Bandit 15 sailboat for sale! 15 feet long, fiberglass hull, centerboard keel, sloop rig with mainsail and jib on a roller furler. Refreshed with all new lines, upgraded Harken... 1979 SailMFG Bandit 15 - Sailboats - Atlanta, Georgia | Facebook Marketplace
Home / Other makes / sailboat mfg bandit 15. sailboat mfg bandit 15. Price: Contact seller; Condition: Used; Make: MFG; Model: Bandit 15; Type: Dinghy; Year: 1975; ... 2017 21 outlaw bay bandit flats boat brand new boat no power great deal Year: 2017 Make: OUTLAW Model: 2017
1979 MFG Bandit 15 ft sailboat on trailer. Delivered. Ajdahan B. | ID #686115740. Quote Accepted Jul 29, 2016 | Listed Jul 27, 2016. Pickup. New Market, MD 21774 US. Residence / Home Business. After Aug 01. Delivery. Rogers, AR 72756 US. Residence / Home Business. Between Aug 07 - Aug 21.
I'll be damned if I can remember whether the Bandit 15 or the Bandit 17 was introduced first but the 15 came out in 1975 or 1976 or so and I' am pretty certain the Bandit 17 was first built while I was running the layup department. ... I really don't think the Bandit 17 was made in 1972. The sail number on the 1979 catalog boat was only 295 and ...