- New Sailboats
- Sailboats 21-30ft
- Sailboats 31-35ft
- Sailboats 36-40ft
- Sailboats Over 40ft
- Sailboats Under 21feet
- used_sailboats
- Apps and Computer Programs
- Communications
- Fishfinders
- Handheld Electronics
- Plotters MFDS Rradar
- Wind, Speed & Depth Instruments
- Anchoring Mooring
- Running Rigging
- Sails Canvas
- Standing Rigging
- Diesel Engines
- Off Grid Energy
- Cleaning Waxing
- DIY Projects
- Repair, Tools & Materials
- Spare Parts
- Tools & Gadgets
- Cabin Comfort
- Ventilation
- Footwear Apparel
- Foul Weather Gear
- Mailport & PS Advisor
- Inside Practical Sailor Blog
- Activate My Web Access
- Reset Password
- Customer Service
- Free Newsletter
Ericson 41 Used Boat Review
Mason 33 Used Boat Review
Beneteau 311, Catalina 310 and Hunter 326 Used Boat Comparison
Maine Cat 41 Used Boat Review
Tips From A First “Sail” on the ICW
Tillerpilot Tips and Safety Cautions
Best Crimpers and Strippers for Fixing Marine Electrical Connectors
Thinking Through a Solar Power Installation
Getting the Most Out of Older Sails
How (Not) to Tie Your Boat to a Dock
Stopping Mainsheet Twist
Working with High-Tech Ropes
Fuel Lift Pump: Easy DIY Diesel Fuel System Diagnostic and Repair
Ensuring Safe Shorepower
Sinking? Check Your Stuffing Box
The Rain Catcher’s Guide
Boat Repairs for the Technically Illiterate
Boat Maintenance for the Technically Illiterate: Part 1
Whats the Best Way to Restore Clear Plastic Windows?
Mastering Precision Drilling: How to Use Drill Guides
Giving Bugs the Big Goodbye
Galley Gadgets for the Cruising Sailor
Those Extras you Don’t Need But Love to Have
UV Clothing: Is It Worth the Hype?
Preparing Yourself for Solo Sailing
How to Select Crew for a Passage or Delivery
Preparing A Boat to Sail Solo
On Watch: This 60-Year-Old Hinckley Pilot 35 is Also a Working…
On Watch: America’s Cup
On Watch: All Eyes on Europe Sail Racing
Dear Readers
Chafe Protection for Dock Lines
- Sailboat Reviews
The Hunter 27 is a boat built to a price--a low price--and it shows; but it may represent a good value.
The Hunter 27 is the smallest boat in the Hunter line, which runs up to 43′ in length. The Hunter 27 is a popular boat with first-time sailboat buyers, and with small-boat sailors purchasing their first auxiliary cruising boat. Since the boat was introduced in 1975, thousands have been built.
Like other boats with a reasonably long production run, the Hunter 27 has gone through minor changes since its introduction. Wheel steering is now standard. The boat utilizes a split backstay to allow a stern boarding ladder and to prevent the helmsman from hitting his head on a centerline backstay. All the ports open for ventilation, The mainsheet lead has been altered, and there have been other minor modifications, such as a switch to European-style pulpits and running lights.
Judging from the response of Hunter owners we’ve talked to, all Hunters, including the 27, are purchased for one reason: price. The Hunter 27 is just about the cheapest diesel-powered 27′ cruising boat money can buy.
In their advertising literature, Hunter stresses that efficiency in construction, standardization of components, and low overhead keep their prices low, To some extent, this is true, and it is neither new, nor is it anything to be ashamed of. The Herreshoff Manufacturing Company, known neither for cheap boats nor low quality, pioneered in component standardization and assembly-line construction.
By eliminating factory-installed options, every Hunter 27 can be built the same. No going to the stockroom for an optional item. No time-consuming reading of each boat’s specifications as it moves down the assembly line. There are trade-offs, however.
An inability to custom-tailor a boat. A lack of flexibility in deck layout. The Hunter 27 owner must customize his boat at the dealer level, or do it himself. This appeals to dealers, who often make as much on the installation of options as they do on commissions.
The Hunter 27 is a bit high-sided and sterile looking. High freeboard and a high cabin trunk are almost necessary in a 27, boat that claims over 6′ of headroom. The sterility comes from the Hunter bone white on bone white color scheme, and paucity of external teak trim. Exterior teak is to the fiberglass boatbuilding industry what chrome is to Detroit. There are no hull and deck color options.
Construction
Construction of the Hunter 27 is solid glass layup, with plywood reinforcement in high-stress areas such as winch mountings and locker tops. Gelcoat and finish quality of the hull molding are good. No roving printthrough is evident, and the hull is quite fair—more than can be said for many more expensive boats.
The hull-to-deck joint of the Hunter 27 is simple and strong. The hull molding has an internal flange molded at right angles to the hull at deck level. This flange is heavily coated with adhesive bedding, the deck molding is laid over the flange, and the joint covered with a slotted aluminum toerail which is through-bolted with stainless steel bolts at 6-inch intervals. This is an obvious and very satisfactory answer to the hull-to-deck joint problem. The flaying surfaces of the joint appear to match well, and the adhesive compound has squeezed out along the joint where it can be inspected.
Across the transom, the joint is less satisfactory. The gelcoat and putty with which the joint is faired at the stern was sloppy on every Hunter 27 we examined.
The keel of the Hunter 27 is a narrow, high aspect lead fin weighing 3,000 lbs. The shoal draft version has a much shallower lead fin weighing 3,200 lbs. The additional weight of the shoal keel is to make up for the shift in the vertical center of gravity of the boat that would occur if a shoal keel of the same weight as the deep fin were to be used.
The keel-to-hull joint has caused problems in some Hunter 27s. The narrowness of the lead keel at the point of attachment to the hull results in considerable leverage on the hull when the boat heels. Several Hunter 27 owners who returned The Practical Sailor boat owner evaluations report oilcanning of the hull, leaking keelbolts, or vertical misalignment of the hull and keel. We have observed this vertical misalignment in the Hunter 25, but we have not seen it specifically in the 27.
The chainplates of the Hunter 27 consist of stainless steel U-bolts fastened through the anodized aluminum toerail. No backing plates are used with these. The chainplates are likely to carry any load to which they will normally be subjected. However, a simple U-bolt, no matter how heavy, is a poor choice for a primary chainplate unless the arc of the U-bolt is radiused to the diameter of the clevis pin which goes through it, and unless the strain on the bolt lines up with its vertical axis, U-bolt chainplates of the correct configuration are used in some European boats, notably the Nicholson and Bowman lines. Both of these lines of boats carry Lloyd’s Bureau of Shipping classification certificates. We strongly suggest that Hunter 27 owners consider installing aluminum or stainless steel backing plates under their U-bolt chainplates, and check them periodically to be sure that the nuts are tight. With only two nuts on each shroud anchorage, this check is extremely important.
The rig is a modern, high aspect ratio masthead sloop. The mast is a deck-stepped, white Kenyon spar, supported by a wood compression column attached to the main bulkhead. We have seen no sign of compression stress in the Hunter 27 mast step.
Hunter uses gate valves on underwater skin fittings, We prefer seacocks. We also prefer some kind of shutoff valve on any skin fitting remotely near the waterline. Few builders provide them. Hunter is no exception.
Handling Under Sail
The Hunter 27 comes with a mainsail and 110% genoa. The total sail area with this configuration is 360 square feet, an average amount for a modern 7,000 lb boat. A larger genoa will be required for sailing in light-air areas.
Despite a ballast/displacement ratio of almost 43%, owners do not consider the Hunter 27 a stiff boat under sail. They also consider the boat’s performance under sail only fair to good. There are several reasons for the boat’s mediocre sailing qualities.
First of all, the boat comes factory-equipped with sails. This means cheaper sails, for they are bought in quantity by the builder. It also, almost inevitably, means sails that are not designed for specific local conditions. Average sails make for average performance.
There is no provision for headsail sheeting angle adjustment. Without a genoa track, all headsails must sheet to the slotted toerail. On a wide 27-footer with this arrangement, the headsail slot will rarely be the proper width for good windward performance.
With a small headsail, the lead will almost always be too far outboard.
There is also no traveler for the main sheet. This limits the creation of the proper angle of attack of the mainsail, and complicates draft control.
A relatively fat boat such as the Hunter 27 rapidly acquires weather helm as the boat heels. This is due in part to the asymmetry of the boat’s submerged sections. The judicious use of sail controls such as travelers, vangs, and flattening reefs greatly enhances the ability to keep the boat sailing on her feet, which will help reduce weather helm. Hunter 27 owners complain that the boat suffers from extreme weather helm.
Chainplates set at the outboard edge of the deck also compromise windward performance. This arrangement makes it almost impossible to close the slot effectively with a large headsail.
If the Hunter 27 were equipped with well-made sails, inboard chainplates, inboard and outboard headsail tracks, a good vang, and a mainsheet traveler, we suspect that there would be a substantial improvement in the boat’s windward ability. There would also be a marked difference in price. Should you desire to make these changes, the parts would probably cost upwards of $1,500. Then the problems begin. How do you attach the chainplates? Will the deck take the vertical loading that will be on the track? Can the boom handle heavy vang loads? We are not talking about turning the Hunter 27 into a hot racer. We are only talking about improving the performance of the boat to a reasonable level for cruising.
Windward performance, then, is one of the tradeoffs made for low price. Only the prospective purchaser, after considering how the boat is to be used, can decide how much that is worth. Since the shoal-draft Hunter 27 is more heavily ballasted than the deep-draft version, its stability is likely to be similar. However, the deep, high aspect ratio fin is likely to be more efficient.
Handling Under Power
With only eight horsepower to push around a 7,000 lb, high-sided boat, do not expect a Hunter 27 to be a sprightly performer under power.
In 1979, the power plant of the Hunter 27 was changed from the eight horsepower Renault diesel. The Renault diesels were relatively untried in the US marine market. The early Yanmar engines, though noisy and noted for their vibration, are also known for their reliability.
At least one owner we talked to was, to put it mildly, disappointed with the Renault installation. Although the engine runs well, the attachment of the shifting mechanism to the transmission lever has the disconcerting habit of vibrating itself loose. When docking, the results of this shortcoming could be less than amusing to both the boat owner and his insurance company.
Owners of Renault-powered Hunter 27s should definitely be aware of this potential problem.
Another owner reported leaking strut bolts and shaft wear due to improper shaft alignment, All engine installations should be realigned after the boat is launched for the first time. This should be a routine part of commissioning, but it rarely is. A given used Hunter 27 may not have had it done.
Engine access is good, behind the removable companionway ladder. There is partial soundproofing in the engine enclosure, but not enough to shield the interior from a substantial amount of noise.
Fuel capacity is 12.5 gallons, in an aluminum tank located in the starboard cockpit locker. The tank is held in place by a stainless steel strap, There is no grounding jumper between the fuel fill and the tank. This is in violation of the standards for fuel tank installation of the American Boat and Yacht Council, which sets minimum standards used in the industry.
Owners consider the boat underpowered with either the Renault or Yanmar engines. They consider the boat’s performance under power only fair to good.
Deck Layout
Because the Hunter 27’s decks are relatively free of sail control hardware, there are relatively few toe stubbers. Even the grayest cloud has a silver lining.
New Hunter 27s have international style running lights mounted on the bow and stern pulpits. These are far superior to the in-hull running lights on older Hunters, and better than those used on many more expensive boats. New boats also have a good-sized foredeck anchor well, incorporating a well-designed latch and a heavy stainless steel eye for the attachment of the bitter end of the anchor rode. The well has a large scupper which drains through the stem.
Although owners consider the cockpit of the Hunter 27 small, we find it comfortable for five, and certainly large enough for a 27′ boat. Wheel steering has definitely made the cockpit seem bigger. With five people in the cockpit, the stern of the boat begins to squat. A bigger cockpit would only encourage sailing with more people, causing the boat to squat even more.
Late models have Yacht Specialties pedestal steering. There is good provision for an emergency tiller, which is supplied with the boat.
Access to the steering gear is excellent, through the lazarette locker. Unfortunately, because the steering gear, scupper hoses, and exhaust hose go through this locker, it cannot be used for storage. To do so would be to risk damage to vital parts of the ship’s systems.
There is a large locker under the starboard cockpit seat. Unfortunately, because the fuel tank is located in this locker, nothing can really be stowed there without risking damage to the fuel system. Wet lines or sails stored in the locker would drip on the aluminum tank, inviting corrosion. Shelves installed in both these lockers would make them more useful.
To raise the cockpit sill above the level of the lowest cockpit coaming, the lower drop-board must be left in place, This complicates access below when underway, but having the companionway blocked up to deck level is essential for sailing in unsheltered waters or heavy weather.
The cockpit bulkhead slopes forward. This means that a dodger must be installed if one wishes to ventilate the cabin in rain or heavy weather.
The high cockpit coamings provide good backrests for those sitting in the cockpit. They should also help keep the cockpit dry. These coamings have moldedin sheet winch islands. The owner wishing to upgrade to winches larger than the standard Lewmar 7s will discover that the islands are too small for a much larger winch. For the owner who wishes to use a large genoa, this could be a real problem. Despite these shortcomings, the T-shaped cockpit is reasonably comfortable, and is one of the boat’s better design features.
The Hunter 27 is a roomy boat. Headroom is just over 6′ under the main hatch, and almost 5′ 10″ at the forward end of the main cabin.
The forepeak contains a double berth. Aft of that cabin is a full-width head. Newer Hunter 27s have a holding tank system. Older boats are likely to have portable heads.
The main cabin has settee berths port and starboard. These settees extend under the forward bulkhead. While this arrangement reduces seating area, it also allows more room for the galley and quarterberth. It’s a reasonable trade-off.
To port, at the aft end of the cabin, there is a quarterberth. A folding chart table is located over the forward end of the quarterberth. To starboard is the galley, with sink, two-burner alcohol stove, and icebox.
With eight opening ports, two opening hatches, and the companionway, ventilation in newer Hunter 27s is excellent at anchor in good weather. Older models have fewer opening ports. As with many boats, there is no provision for ventilation in heavy weather.
With a molded glass headliner, teak-finished bulkheads, solid teak trim, and teak cabin sole, the cabin has a finished appearance. There is good storage for a boat of this size for short-term cruising. Joinerwork is of fair stock boat quality.
Conclusions
A new Hunter 27 in the ’80s was about the least expensive boat in its class—far cheaper than many other boats of this size. The boat also comes standard with items that are optional on other boats, such as wheel steering, life jackets, anchor, and fire extinguishers.
However, it is not realistic to expect a boat that is 15% cheaper than another boat of the same size and type to be equivalent in quality. There is just so much that efficiency, standardization, and bulk buying can do toward reducing the price of a boat. Inevitably, the price of a boat is a function the time, materials, and incidental costs that go into it. There is no magic way to reduce the cost of building a boat.
The Hunter 27 graphically demonstrates how costs can be reduced. A great deal of time is saved in construction by hurrying finish work, by using staples instead of screws, by eliminating the necessity to customize each boat.
Hunter owners are the first to admit the influence that the low price of the boat had on their boat-buying decision. Many are happy with their boats, some are defensive about them, and others are really unhappy with them. For the relatively unsophisticated sailboat buyer—the new sailor, the powerboat convert—the Hunter 27 may represent a good value. As his experience grows, we expect he will be willing to pay more, in order to get more.
RELATED ARTICLES MORE FROM AUTHOR
Thank you for this article as I, a novice am about to rehab and deal with a 1978 Hunter. As I go through this I suspect many a sentence will ring in my mind to remind me what an experienced sailor has: time to reflect on learning experiences and sharing it with others. Best Wishes and fair winds – Alex Schult
I have a 1979 Hunter 27 I have completely restored her I re manned a yanmar 20gmf new North Sailes new standing and running rigging keel bolts do not leak self tailing winches yes she is a production boat but points and sails fine for cruising. Interior completely renovated hmmn no staples! I have seen and been on some so called higher end boats quality and preformence is a matter of opinion you need deep pockets for a custom boat if you have the $$$ go for it for me I’ll stick with my Hunter 27 Aura great boat without breaking the bank!😎
Hey Theodore, I’ve owned a 82 Hunter 27’ for over 20 years. I took a job about 5 years ago that included a lot of international travel and found myself using my boat for doc candy and Christmas decorations at our home doc. So, I’m beginning a complete refrub, which includes a new Yanmar motor (ouch). I’ve got quite a bit of interior and exterior rehab with not a lot of experience. Anyway I could pull on some of your experience?
We purchased a 1979 Hunter 27 in 2020 as an upgrade from our Nordica 16. Our territory (the Baie de Chaleurs) in northern New Brunswick Canada has a reputation for unpredictable winds and weather. I installed wheel steering (an Edson outfit) which greatly improved my enjoyment. However, I still has issued with docking using the low-cockpit controls for the Yanmar diesel. Researching for solutions, I came across the website of “Electric Yacht” out of Minnesota. So, in 2021, I converted the drive to electric. It has taken me two years to sell the Yanmar. The conversion cost me around $15,000 CA including 4 hours for a machinist to align the propeller shaft and electric motor properly (the hardest part). We are more than happy with the results. Docking now is a joy. I even learned to back-in to our berth and my eyes are always on my surroundings. All the controls are on my binacle The 10 KW motor uses four 150 AmpHr lithium iron-phosphate batteries and works flawlessly. We have even crossed the bay to Quebec twice under just power alone. No gas, no fumes, no noise. He are happy saiiers 🙂
LEAVE A REPLY Cancel reply
Log in to leave a comment
Latest Videos
What’s the Best Sailboats for Beginners?
Why Does A Sailboat Keel Fall Off?
The Perfect Family Sailboat! Hunter 27-2 – Boat Review
Pettit EZ-Poxy – How to Paint a Boat
Latest sailboat review.
- Privacy Policy
- Do Not Sell My Personal Information
- Online Account Activation
- Privacy Manager
- BOAT OF THE YEAR
- Newsletters
- Sailboat Reviews
- Boating Safety
- Sails and Rigging
- Maintenance
- Sailing Totem
- Sailor & Galley
- Living Aboard
- Destinations
- Gear & Electronics
- Charter Resources
- Ultimate Boating Giveaway
Quick Look: Hunter 27
- By Cruising World Staff
- Updated: August 26, 2010
Even if you can’t have–or don’t want–a big boat, you can have big-boat stuff. At least that’s the message Hunter Marine is sending with the new Hunter 27, especially when it’s tricked out with the Deluxe Package.
Right down to the shore-power supply, the half-electric/half-butane two-burner stove, the microwave, and the 12-volt cooler that you load at home and stow in a specially built drawer in the galley, this boat is equally well equipped for life at the dock and for sorties to nearby cruising grounds.
The Hunter design team came up with a boat that fits the niche of a 27-foot sailboat for novices who want stability, ease of operation, and value. With leisure time being a rare commodity for most folks, a Category C venue is about as far as most will get on the spur of a moment before it’s time to head back. The Hunter provides a means to enjoy such moments in comfort.
For anyone whose experience in 27-footers is determined by boats like the Bristol 27 of the 1960s–me, for one–the Hunter 27 offers a new yardstick. Thanks to its plumb stem, long waterline, broad beam, and high freeboard, there’s elbow room everywhere the older boats lack it: in the V-berth (in this layout, essentially an extension of the saloon), the saloon (with comfortable seating for at least six around a central table), the head (complete with shower), and the galley. In addition, the Hunter provides an aft cabin complete with a hanging locker, a seat, and a huge athwartships berth under the cockpit–all wrapped into a package with crisp and attractive lines.
An inboard engine, a 9-horsepower Yanmar, is standard, and access to it is generous, particularly from the front: The companionway steps hinge up, their weight taken by gas struts, to reveal most of the maintenance points and a water heater for the shower.
The Hunter 27 is also quite nicely equipped for sailing. The mainsheet is double-ended–one end with a 3:1 purchase for quick trimming, and the other with a 6:1 ratio for fine-tuning–and the cockpit is laid out for easy singlehanding. The standard rig is a fractional B&R arrangement with optional in-mast furling.
Another big-boat feature is the wheel steering. At 27 feet, the boat is at the margin between the practicality of a tiller and the comfort of a wheel, but Hunter insists the market has embraced wheel steering, so a wheel it is. The optional Lewmar folding wheel further improves access to the walk-through transom, but it’s pushed so far aft to open up the cockpit that the stern lifeline interferes with the helm seat. As on all Hunters, back-seat drivers can second-guess the skipper from perches in the corner pushpits, but they’d better not be too critical, as guest spots on this boat will be easy to fill.
- More: 2001 - 2010 , 21 - 30 ft , Coastal Cruising , marlow-hunter , monohull , quick look , Sailboat Reviews , Sailboats
- More Sailboats
Sailboat Preview: Elan GT6 Explorer
For Sale: 1984 Camper & Nicholsons 58
Alubat Updates OVNI Models
For Sale: Little Harbor 63 Ketch
From Paradise to Medical Emergency: A Bahamas Nightmare Turns Lesson Learned
Free Medical Advice: The Unwarranted, Unprofessional Edition
Gatekeepers of the Waterway
Rigging Redo: Our Switch to Synthetic
- Digital Edition
- Customer Service
- Privacy Policy
- Terms of Use
- Email Newsletters
- Cruising World
- Sailing World
- Salt Water Sportsman
- Sport Fishing
- Wakeboarding
| Hunter 27
| |||||||||||||||||||||||||||||||||||||||||||||
IMAGES
VIDEO
COMMENTS
Shoal draft/wing keel: 3.25′, Disp. 7200 lbs. Ballast: 3200 lbs Later boats were available with Yanmar diesel. Information above is from a Hunter brochure © 1979.
Find Hunter 27 boats for sale in your area & across the world on YachtWorld. Offering the best selection of Hunter boats to choose from.
The Hunter 27 is the smallest boat in the Hunter line, which runs up to 43′ in length. The Hunter 27 is a popular boat with first-time sailboat buyers, and with small-boat sailors purchasing their first auxiliary cruising boat. Since the boat was introduced in 1975, thousands have been built. Hunter 27 Specs.
Find 28 Hunter 27 boats for sale near you, including boat prices, photos, and more. Locate Hunter boat dealers and find your boat at Boat Trader!
Hunter 27 Not so long ago, compact coastal cruisers usually provided cramped quarters and minimal comfort, but the new Hunter 27 is cut from an entirely different mold. It s only 27 feet long, but its 6 feet, 2 inches of headroom and nearly 10 feet of beam provide enough internal volume for cruising amenities not often found on 27-foot boats. Being able to stand up down below is Sail Staff ...
Hunter 27 This model was designed by John Cherubini, introduced in 1974 and produced until 1984, with 2,000 examples completed. It has a masthead sloop rig, a length overall of 27.17 ft (8.3 m), a waterline length of 22.00 ft (6.7 m), displaces 7,000 lb (3,175 kg) and carries 3,000 lb (1,361 kg) of ballast.
The Hunter 27e just may be the quintessential "new-old boat." The hull, deck, appendages, rig and interior have been sailing aboard the Hunter 27 since 2006.
Hunter 27 is a 8.3 m monohull sailboat designed by John Cherubini and built by Hunter Marine between 1974 and 1984. Designer.
305-508-5366. Hunter 27. Rogersville, Alabama. 1989. $10,500. Very popular and comfortable sailboat. Family friendly, easy sailing boat. Stern swim platform and ladder make for great access to the water. New sails, sail cover, halyards, sheets, life lines and more in 2022.
The HUNTER 27 EDGE is designed as a trailerable power/sail hybrid. It can accept an outboard motor of up to 80hp and is capable of more than 20 knots under power. The water ballast is added for sailing. Disp. with water ballast tanks full: 5048 lbs./2290 kgs.
The Hunter provides a means to enjoy such moments in comfort. For anyone whose experience in 27-footers is determined by boats like the Bristol 27 of the 1960s-me, for one-the Hunter 27 offers a new yardstick. Thanks to its plumb stem, long waterline, broad beam, and high freeboard, there's elbow room everywhere the older boats lack it ...
Specs above are for models with shoal keel and standard sail plan. Opt. deep keel model: Draft - 5.0′ / 1.52m; Disp - 7,505 lbs. / 3,404 kg.; Ballast - 1901 ...
2005 Hunter 27 US$34,900 Newburyport, Massachusetts View 10 Photos Engine Single Yanmar Total Power 18hp Engine Hours - Class Sail Cruiser Length 27ft Year 2005 Model 27 Capacity - 58 R Merrimac St., Newburyport, 01950, United States
The Hunter 27-2 is an American sailboat that was designed by the Hunter Design Team as a family cruiser and first built in 1989. [ 1][ 2][ 3] The design was originally marketed by the manufacturer as the Hunter 27, but is now usually referred to as the Hunter 27-2 to differentiate it from the unrelated 1974 Hunter 27 and later designs with the ...
2005. 27'. 9'11'. 5'. Virginia. $33,000. Description: A pocket family cruising boat, the Hunter 27 is uncomplicated, simple to sail with in mast furling main and furling jib, and very roomy for its size. It has numerous nice design elements which make it a practical, pleasant boat on deck and down below and has easy access to engine, shaft ...
Find Sail Hunter 27 boats for sale in your area & across the world on YachtWorld. Offering the best selection of Hunter boats to choose from.
Find Hunter 27' boats for sale in United States. Offering the best selection of Hunter boats to choose from.
Minnesota. $5,500. Description: For sale is our 1978 Hunter 27' sailboat. It has been well kept and in great condition. This is a very clean boat and ready to sail this summer. Professionally winterized. Recent work included new ports and custom made cushions for the v-berth last season. Fantastic boat steady boat for day sailing and roomy ...
Hunter 27. Rogersville, Alabama. 1989. $10,500. Very popular and comfortable sailboat. Family friendly, easy sailing boat. Stern swim platform and ladder make for great access to the water. New sails, sail cover, halyards, sheets, life lines and more in 2022. Reliable Yanmar 1GM10 diesel engine.
Michigan. $3,000. Description: 1977 Hunter 27 for sale, located in St. Clair Shores. Since 2020, the following have been repaired or replaced: -New mainsail. -New standing rigging. -New running rigging.
This Hunter 27 is a strong, solid, decent boat, and she sports a custom SS Bimini that adds to the enjoyment of the day whether at the dock or out sailing. With the comfort of the approximated 6' headroom and large interior, this boat is a great weekender that can bring you years of enjoyment. Affordable, in reasonable condition, comfortable ...
HUNTER 27-2 Save to Favorites BOTH US IMPERIAL METRIC Sailboat Specifications Definitions
Sail Area / Displacement Ratio. A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more. Formula. SA/D = SA ÷ (D ...
2009 Hunter 27 US$39,900 Fairpoint, Ohio View 36 Photos Engine Yanmar Total Power 18hp Engine Hours - Class Sail Cruiser Length 27.33ft Year 2009 Model 27 Capacity -