three masted sailboat

• Yachting World
• Digital Edition

Sea Eagle II: The inside story of the world’s largest aluminium sailing yacht

• June 17, 2020

Rupert Holmes talks to the build and design teams behind the 81m Royal Huisman flagship Sea Eagle II, which recently completed her sea trials off the coast of the Netherlands

Royal Huisman has an enviable track record of producing superlative sailing superyachts , with hundreds of projects completed to date. Yet the latest vessel to leave the shipyard is extraordinary even by these standards. She is the world’s largest aluminium yacht and is one of the top ten biggest sailing yachts ever built. 

Sea Eagle II is a magnificent 81m/266ft three-masted Panamax schooner, created by the same Dykstra and Mark Whiteley Design collaboration that produced the stunning 56m/186ft Royal Huisman ketch Aquarius just over a year ago. 

Her very experienced owner has sailed all his life and spent a lot of time at sea. “ Sailing around the world in the weekends is a phrase often used to outline his days on board,” says Royal Huisman project manager Arjo Spans. He is also a repeat client – the original Sea Eagle is a 43m/143ft Frers/Rhoades Young design launched by the Dutch yard in 2015. 

Sea Eagle II is due to be delivered to her owner in July 2020. Photo: Tom Van Oossanen

Initially the brief for the new boat was for a more classical yacht, similar to the 79m/259ft three-masted gaff schooner Athena , which Royal Huisman built for Silicon Valley mogul Jim Clark in 2004. However, the owner quickly realised he would prefer a more modern yacht: a fast-looking hull shape with straight lines, long waterline and plumb bow. The concept of Sea Eagle II was born. 

“Having worked with him to build the original Sea Eagle , we understood the owner’s priorities from the start,” says Spans. “These are: low maintenance, functionality, and safety, including ease of moving around the yacht, even when heeled at sea.

“For each of the key aspects of the boat he asked for three proposals, he would then choose one of them and leave us to implement it,” Spans adds. “He put a huge amount of trust in the shipyard and in our craftsmanship.”

Article continues below…

Sailing around Cape Horn on the world’s largest ketch Aquijo

When asked to help guide the 86m/282ft ketch Aquijo for a cruise in Tierra del Fuego and a Cape Horn…

Royal Huisman reveals 116ft ‘floating resort’ catamaran superyacht concept

“This is not a change in direction; it is an expansion of possibilities,” says Jan Timmerman, CEO of the 136-year-old…

The scale of this yacht is nothing short of astounding. The sleek hull lines belie the 4m/13ft freeboard and the two-tier deckhouse, including a half-raised bridge, looks entirely in proportion. The main deck-level accommodation has a huge expanse of glass, with the 360º view interrupted only by minimal mullions. There are also acres of cockpit space, with room left over for a long sweep of uncluttered aft deck.

Mark Whiteley was responsible for developing the interior and refining the exterior styling. He created a simple and modern style for the interior, with straight lines. Lacquered Alpi walnut wall panels, brushed natural oak floors and dark stained wenge trims are complemented by light colour leather handrails and upholstered wall panels.

Part of the brief was for the yacht to be able to host business meetings – the forward part of the superstructure therefore includes a large saloon with expansive seating, plus a 16-seat table for formal dining.

The largest winches are capable of a tremendous 18-tonne pulling load. Photo: Rondal

A technical challenge 

Dykstra Naval Architects drew a narrow and efficient hull shape with a maximum beam of only 12.4m/40ft, while displacement has been kept down to a relatively light 1,050 tonnes at full load. The final shape was achieved following extensive computational flow dynamics (CFD) calculations, velocity prediction programming (VPP), and testing in both tow tanks and wind tunnels. These all helped to determine sail balance, keel position and predicted rudder angles.

The plumb bow is balanced by a modest, but graceful, stern overhang, with a contemporary, relatively wide transom at deck level. Twin knuckle lines extend aft from near the bow, merging into one amidships and then forming a chine aft. Right aft the hull has negative curvature on the flare below the chine, which gives interesting reflections in the gleaming paintwork.

The lead naval architect, Dykstra’s Erik Wassen, told me he introduced the knuckle lines to give the hull “a bolder and more interesting shape.” The owner liked the concept and Mark Whiteley helped to refine the detail. Wassen describes the underwater shape as being: “a very modern round bilge shape, with a nice slender hull that gives good sailing capabilities.” Appendages are a conventional fin keel and balanced rudder.

Photo: Priska van der Meulen

The latter presented an interesting technical challenge, according to Wassen. Initially they looked at fabricating the rudder stock in steel, but that alone would weigh three tonnes. Screening a number of alternatives led to a decision to use carbon for the stock, with a foam core section clad in a relatively thin composite skin for the blade. 

The result is what it’s producer, Royal Huisman’s sister company Rondal, believes to be the biggest ever carbon rudder, weighing only 1,250kg, which helps to keep weight out of the ends of the boat. The weight saving here also enabled the intended fore and aft trim to be achieved with the ballast in its optimal location.

The rudder includes load sensors to record and verify torque, side forces and bending moment while sailing. “There is not much load data available for rudders of this size of sailing yacht, so it’s very conservatively engineered,” says Spans. Fibre-optic sensors are incorporated to enable a database to be created that will help with designing future composite rudders for very large yachts.

Due to the distance of the helm stations from the rudder, the steering is via an electric-hydraulic system, which means there’s no feedback from the helm. The plan is to investigate whether data from the sensors can be used in a feedback system to give a more natural feel to steering the boat under sail. 

Structural engineering

This is one of the most interesting elements of yacht design, yet is all too often under appreciated. Extensive modelling showed a couple of unexpected problems that needed clever solutions during Sea Eagle II ’s design and engineering. 

Instead of the hull flexing smoothly under load, like an I-beam, the presence of a forward intermediate deck introduced hard spots in this area, resulting in stress concentrations at the forward end of the superstructure. This required a lot of design work to create a smooth transition of stress from the lower deck to the intermediate one and then on to the upper deck.

Structural engineering was extensively modelled for Sea Eagle II

The roof of the superstructure also posed a challenge, in that the inside surface of a beam needs to become shorter as it flexes. But the original plan for the aluminium roof wasn’t able to accommodate this, with the result the modelling showed stresses concentrating in the corners of the mullions and in the glass itself. 

The solution was to avoid welding the top of the mullions to the roof, opting instead for a flexible joint that allows for movement when necessary. Wassen likens it to the joints in large buildings that need to be included to allow for thermal expansion and contraction.

Whiteley also helped to refine the exterior styling. In addition to the detail of the knuckles, his input helped to refine the shapes – particularly curves and softening corners – in the superstructure.

COVID-19 restrictions meant her delivery date had to be pushed back by 3 months. Photo: Crea Fragma / Rondal

Panamax rig

The requirement to be able to clear the Bridge of the Americas at the Pacific end of the Panama canal called for the schooner rig with three equal masts. All are of carbon and are made by Rondal, with integrated sail handling systems and Carbo-Link carbon standing rigging.

Each mast has in-boom furling, while the aft two have staysails for use when reaching. The tank and wind tunnel testing was used to verify different headsail options, particularly to determine the differences between a large blade jib versus a large staysail or yankee.

“Obviously you have better windward performance with a large blade,” says Wassen, “but as soon as you bear away the yankee is much more forgiving in trimming, so we decided that made more sense.” A further advantage is that when the yankee is part furled the sheeting point remains the same. 

Rondal’s Integrated Sailing System consists of the three carbon Panamax masts with furling booms, hydraulic boomvangs, headsail furling systems, deck winches and equipment, captive winches and continuous solid carbon standing rigging by Carbo-Link, all equipped with load sensing capabilities. Photo: Rondal

In addition, a blade jib requires much higher sheet loads to maintain leech tension. Even though Sea Eagle II is a three-masted yacht, the yankee sheet loads are still predicted to reach 18 tonnes – but this still allows standard-size captive winches to be used, rather than larger custom-made units.

The Panamax limitation obviously poses the question as to whether sail area needed to be compromised to fulfil this criteria. However, this is clearly not the case for Sea Eagle II . Hull speed is close to 20 knots and the yacht is clearly capable of surfing at much higher speeds, despite being designed as a pure cruiser. This role, of course, suggests keeping heel angles to a maximum of 10-15°. 

Nevertheless, the VPP figures suggest potential boat speeds of 17-18 knots in 16 knots of true breeze with a true wind angle of 70°. “As soon as you can ease the sheets a little bit, we have a lot of sail area,” says Wassen, “so on a beam reach, I wouldn’t be surprised if a steady 20 knots is possible.” 

Specification

LOA: 81m (266ft) Air draught: 62m (205ft) Hull: Aluminium Guest accommodation: 11 Crew accommodation: 14 Exterior styling: Dykstra Naval Architects and Mark Whiteley Design Naval Architecture: Dykstra Naval Architects Interior design: Mark Whiteley Design Classification: Lloyd’s MCA (LY-3)

First published in the April 2020 edition of Supersail World.

• Anchoring & Mooring
• Boat Anatomy
• Boat Culture
• Boat Equipment
• Boat Safety
• Sailing Techniques

Navigating the high seas: Three mast sailing ships

Vessels such as three mast sailing ships have been an integral part of maritime history and have played a pivotal role in the growth and development of trade and exploration. 

From the earliest wooden vessels to great clippers, sailing ships have evolved over the centuries, adapting to changing needs and improving technology. The many types of sailing vessels existing are less iconic than the three mast sailing ship.

These majestic vessels form a rich legacy in maritime history—a legacy born out of their impressive design specifications and construction processes, their unique daily life on board for crew members, some famous ships that are still remembered today, and much more. 

This article will explore the fascinating history of three masted sailing ships.

Key Takeaways

• There are two main types of three-masted ships: square-rigged sailing ships and fore-and-aft rigged sailing ships.
• Three-masted ships were used for long-distance voyages and coastal trading and fishing, while fore-and-aft rigged sailing ships were mainly used for shorter trips.
• The design and construction of three-masted ships were critical to their success, and shipbuilders used various materials, including wood, metal, and natural fibers.
• Daily life on board a three-masted ship was challenging, with cramped living conditions and limited food rations.
• Navigating a sailing ship was complex, requiring understanding of stars, winds, currents, and tides, as well as the use of instruments such as sextants, compasses, maps, and charts.
• The evolution of sailboats, including Schooner, Ketch, and Yawl boats, has been driven by the needs and desires of sailors and has led to faster, more aerodynamic vessels with added amenities for comfort.

Types of three masted ships

Square Rigged Sailing Ships are large, rectangular vessels characterised by large sails and yards suspended from masts. These ships are known for their stability and efficiency in windy conditions, making them ideal for long-distance voyages. 

Common types of Three-Mast Square Rigged Sailing Ships include the Bark, Barque, and Brig – all renowned for their durability, cargo capacity, and efficiency in rough seas.

Fore-and-aft rigged sailing ships are the opposite of square-rigged vessels; they have smaller and more flexible sails set parallel to the keel, making them more agile but slower than square-rigged boats. These ships were primarily used for shorter trips, such as coastal trading and fishing, with examples including Schooners, Ketches, and Yawls.

The primary purpose of these three mast sailing ships was to facilitate trade or exploration on long ocean voyages. Their ability to reach high speeds combined with their large cargo capacity made them ideal for travelling far distances safely. 

On the other hand, fore-and-aft rigged sailing ships were used mainly for coastal trading or fishing due to their smaller size and agility when navigating narrow channels or shallow waters.

Design and construction of three mast sailing ships

The design and construction of three mast sailing ships were critical to their success. Shipbuilders used various materials for sails and ropes, including wood, metal, and natural fibres. Wood was the most commonly used material, with different types of wood used for other parts of the ship. Metal was used for reinforcing key areas such as the rudder and keel, while sails and ropes were made from natural fibres such as hemp or flax. 

The design of three mast sailing ships incorporated several vital features, including the keel, rudder, and deck. The keel served as the ship’s backbone, providing stability, while the rudder allowed for steering. The deck was the main work area for storing supplies, handling cargo, and performing daily tasks.

Shipbuilding yards were typically located near waterways; constructing a ship could take several years. Skilled artisans, including carpenters, blacksmiths, and riggers, worked together using traditional techniques passed down over generations.

Life on a three mast sailing ship

Daily life on board a three-mast sailing ship was harsh and challenging , with cramped living conditions and limited food rations. The sailors worked long hours performing various tasks, including hoisting and trimming sails, steering the ship, and performing maintenance tasks.

Accommodations were limited, with most crew members sleeping in hammocks in the cramped quarters below deck. Meals were often simple and repetitive, consisting of salted meat, hardtack, and dried fruits and vegetables. However, the cook and stewards were still essential members of the crew responsible for feeding the crew and maintaining morale during long voyages.

The crew was divided into several distinct roles, each with its responsibilities and duties. The captain and officers were responsible for the overall operation, including navigation, voyage planning, and discipline. At the same time, sailors and deckhands formed the ship’s backbone and were responsible for hoisting sails, keeping watch, and other physical tasks. 

Navigation and voyage planning

Navigating a sailing ship was an intricate and complex task requiring understanding the stars, winds, currents, and tides. The captain and officers used instruments such as sextants, compasses, maps, and charts to plan their course and navigate the ship.

Weather patterns were also considered for voyage planning, as storms or rough seas could potentially slow or derail a voyage. The crew had to be prepared for any possible danger, including shipwrecks or attacks by pirates; therefore, careful precautions had to be taken.

Ports of call during a voyage were welcomed opportunities for rest, resupply, and trade. Sailing ships often carried goods, including spices, textiles, and precious metals, which they traded in ports along their journey. 

Famous three mast sailing ships

The Cutty Sark – Built-in 1869 in Scotland, The Cutty Sark was one of the last clipper ships to be built. It was designed for speed and used to transport tea from China to Britain in just over 80 days. The Cutty Sark is now preserved in a dry dock in London and serves as a museum where visitors can explore the ship and learn about its history.

The Flying Dutchman – A legendary ship said to be cursed and doomed to sail forever without making port; The Flying Dutchman has captured the imagination of people throughout centuries. Its tale of adventure has inspired many works of fiction, including the famous opera by Richard Wagner. 

The Star of India – Built in 1863 on Ramsey, Isle of Man, this beautiful three-mast sailing ship was initially used for cargo transportation between England and India before becoming a training ship for the British Merchant Navy. Nowadays, she is preserved in San Diego, California and is open for public tours.

The HMS Victory – Launched in 1765, is best known as Admiral Horatio Nelson’s flagship at the Battle of Trafalgar in 1805. It now serves as a museum ship in Portsmouth, England.

Still sailing: the legacy of three mast sailing ships

The legacy of three-mast sailing ships is still evident today, and many have been preserved and restored to serve as museums and tourist attractions. These ships are a symbol of maritime history and provide a glimpse into the life and times of sailors. They also remind us of the importance sailing ships had in global trade, commerce, and international relations during the 16th to 19th centuries.

These ships were built for long voyages and could carry a high volume of cargo, making them particularly suited to transporting goods between countries. They played an instrumental role in establishing trade routes and bringing new markets together, thereby contributing to the growth of economies and industries. 

Three mast sail ships also served another purpose: representing the power and prestige of their countries through flagships . Their voyages enabled the exchange of goods, ideas, and cultures across continents – essential for maintaining diplomatic relationships between nations when long-distance communication relied solely on sea transportation. 

Significance in cultural and social history

Three mast sailing ships have had an immense influence on cultural and social history. They were involved in some of the most significant moments of exploration and colonial expansion, often resulting in far-reaching consequences that continue to be felt today. 

Moreover, they have captured the imagination of artists, writers and filmmakers since ancient times; their romantic image has been depicted in countless works of art, literature and popular culture.

On top of that, these ships played a crucial role in developing seafaring technology and navigational practice. Their used advanced science and navigation, while their sailors’ experiences contributed to the emergence of new techniques and tools for sea travel. The legacy they left behind is now revered as a symbol of a bygone era – with many being used as educational resources to teach the history and science of maritime travel.

Modern-day uses of three mast sailing ships

Even though their use has declined, three-mast sailing ships remain a part of maritime heritage. They are used for various purposes, such as recreation and tourism. They make excellent tourist attractions, sometimes being restored and converted into museums – providing visitors with a unique insight into the world of seafaring.

Moreover, these ships are also utilised in educational programs wherein traditional sailing techniques and navigation are taught hands-on. These courses allow participants to experience life on the sea and learn about its rich history and culture.

Finally, three mast sailing ships are essential in preserving our maritime history and culture. Many organisations and groups strive to protect them by ensuring their continued maintenance – so that future generations can benefit from their legacy.

Evolution of schooner, ketch, and yawl boats

Throughout history, the evolution of sailboats has been driven by the needs and desires of sailors. From the three-mast ships of the early days to today’s modern Schooner, Ketch, and Yawl boats, the design and construction of these vessels have undergone a remarkable transformation.

In particular, the 19th and 20th centuries showed a significant shift in the use of sailboats – as they moved away from being primarily used for commercial purposes towards leisure and recreation. As such, boat designers began to pay more attention to making them aerodynamic to increase speed while adding cabins and other comforts to make them more suitable for leisurely outings.

Today’s Schooner, Ketch, and Yawl boats are among some of the most popular sailboats used; they are designed with speed and convenience in mind but also provide plenty of amenities for comfort. Thanks to lighter materials and advanced technology, these boats offer a faster sailing experience than ever – along with added strength and durability. 

In short – these boats represent a symbol of how far sailing technology has come in terms of design and utility – creating an unparalleled sailing experience for all who step onboard.

The three-masted sailing ships of our maritime past were undeniably impressive vessels in terms of design and functionality. They served as a primary means of transportation for goods and people for centuries, setting the standards for sailing vessels worldwide. Their construction and design techniques were intricate processes that drew on elements of tradition, innovation, and skill.

Today, these ships continue to captivate us with their sheer size and power while providing an exciting glimpse into the seafaring world. While they may not be used as often nowadays, they will always serve as a reminder of the legacy they left behind – demonstrating the strength, resilience, and hard work of sailors who persevered through difficult times and dangers to explore, trade, and spread culture throughout the world. 

Boom Vang Sailing Fundamentals

Reach new heights on a boat with a bosun chair, related posts, yacht vs boat: what is the difference, rib (rigid inflatable boat): a comprehensive guide, sib boat: a comprehensive guide.

• Cookie Policy
• Privacy Statement

© 2023 TIGERLILY GROUP LTD, 27 Old Gloucester Street, London, WC1N 3AX, UK. Registered Company in England & Wales. Company No. 14743614

Welcome Back!

Login to your account below

Remember Me

Retrieve your password

Please enter your username or email address to reset your password.

Add New Playlist

- Select Visibility - Public Private

Types of Sailboats: A Complete Guide

Learning the different types of sailboats can help you identify vessels and choose the right boat.

In this article, we'll cover the most common kinds of sailboats, their origins, and what they're used for. We'll also go over the strengths and weaknesses of each design, along with when they're most useful.

The most common kind of sailboat is the sloop, as it's simple to operate and versatile. Other common sailboat types include the schooner, cutter, cat, ketch, schooner, catamaran, and trimaran. Other sailboat variations include pocket cruisers, motorsailers, displacement, and shoal-draft vessels.

The information found in this article is sourced from boat reference guides, including A Field Guide to Sailboats of North America by Richard M. Sherwood and trusted sources in the sailing community.

Table of contents

Distinguishing Types of Sailboats

In this article, we'll distinguish sailboats by traits such as their hull type, rig, and general configuration. Some sailboats share multiple characteristics with other boats but fall into a completely different category. For example, a sailboat with a Bermuda rig, a large engine, and a pilothouse could technically be called a sloop, but it's more likely a motorsailer.

When discerning sailboat type, the first most obvious place to look is the hull. If it has only one hull, you can immediately eliminate the trimaran and the catamaran. If it has two or more hulls, it's certainly not a typical monohull vessel.

The next trait to consider is the rig. You can tell a lot about a sailboat based on its rig, including what it's designed to be used for. For example, a long and slender sailboat with a tall triangular rig is likely designed for speed or racing, whereas a wide vessel with a complex gaff rig is probably built for offshore cruising.

Other factors that determine boat type include hull shape, overall length, cabin size, sail plan, and displacement. Hull material also plays a role, but every major type of sailboat has been built in both wood and fiberglass at some point.

Sailboat vs. Motorsailer

Most sailboats have motors, but most motorized sailboats are not motorsailers. A motorsailer is a specific kind of sailboat designed to run efficiently under sail and power, and sometimes both.

Most sailboats have an auxiliary engine, though these power plants are designed primarily for maneuvering. These vessels cannot achieve reasonable speed or fuel-efficiency. Motorsailers can operate like a powerboat.

Motorsailers provide great flexibility on short runs. They're great family boats, and they're popular in coastal communities with heavy boat traffic. However, these features come at a cost. Motorsailers aren't the fastest or most efficient powerboats, and they're also not the most agile sailboats. That said, they make an excellent general-purpose sailing craft.

Monohull vs. Multi-hull: Which is Better?

Multihull sailboats are increasingly popular, thanks to advances and lightweight materials, and sailboat design. But are they better than traditional sailboats? Monohulls are easier to maintain and less expensive, and they offer better interior layouts. Multihulls are more stable and comfortable, and they're significantly easier to control. Multihull sailboats also have a speed advantage.

Monohull Sailboats

A monohull sailboat is a traditionally-shaped vessel with a single hull. The vast majority of consumer sailboats are monohulls, as they're inexpensive to produce and easy to handle. Monohull sailboats are proven and easy to maintain, though they lack the initial stability and motion comfort of multi-hull vessels.

Monohull sailboats have a much greater rig variety than multi-hull sailboats. The vast majority of multihull sailboats have a single mast, whereas multi-masted vessels such as yawls and schooners are always monohulls. Some multi-hull sailboats have side-by-side masts, but these are the exception.

Catamaran Sailboats

The second most common sailboat configuration is the catamaran. A catamaran is a multihull sailboat that has two symmetrical hulls placed side-by-side and connected with a deck. This basic design has been used for hundreds of years, and it experienced a big resurgence in the fiberglass boat era.

Catamarans are fast, efficient, and comfortable. They don't heel very much, as this design has excellent initial stability. The primary drawback of the catamaran is below decks. The cabin of a catamaran is split between both hulls, which often leaves less space for the galley, head, and living areas.

Trimaran Sailboats

Trimarans are multi-hull sailboats similar to catamarans. Trimarans have three hulls arranged side-by-side. The profile of a trimaran is often indistinguishable from a catamaran.

Trimarans are increasingly popular, as they're faster than catamarans and monohulls and considerably easier to control. Trimarans suffer from the same spatial limitations as catamarans. The addition of an extra hull adds additional space, which is one reason why these multi-hull vessels are some of the best-selling sailboats on the market today.

Sailboat Rig Types

Rigging is another way to distinguish sailboat types. The rig of a sailboat refers to it's mast and sail configuration. Here are the most common types of sailboat rigs and what they're used for.

Sloops are the most common type of sailboat on the water today. A sloop is a simple single-mast rig that usually incorporates a tall triangular mainsail and headsail. The sloop rig is easy to control, fun to sail, and versatile. Sloops are common on racing sailboats as they can sail quite close to the wind. These maneuverable sailboats also have excellent windward performance.

The sloop rig is popular because it works well in almost any situation. That said, other more complex rigs offer finer control and superior performance for some hull types. Additionally, sloops spread their entire sail area over just to canvases, which is less flexible than multi-masted rigs. The sloop is ideal for general-purpose sailing, and it's proven itself inland and offshore.

Sloop Features:

• Most popular sailboat rig
• Single mast
• One mainsail and headsail
• Typically Bermuda-rigged
• Easy to handle
• Great windward performance
• Less precise control
• Easier to capsize
• Requires a tall mast

Suitable Uses:

• Offshore cruising
• Coastal cruising

Cat (Catboat)

The cat (or catboat) is a single-masted sailboat with a large, single mainsail. Catboats have a thick forward mast, no headsail, and an exceptionally long boom. These vessels are typically gaff-rigged, as this four-edged rig offers greater sail area with a shorter mast. Catboats were popular workboats in New England around the turn of the century, and they have a large following today.

Catboats are typically short and wide, which provides excellent stability in rough coastal conditions. They're hardy and seaworthy vessels, but they're slow and not ideal for offshore use. Catboats are simple and easy to control, as they only have a single gaff sail. Catboats are easy to spot thanks to their forward-mounted mast and enormous mainsail.

Catboat Features:

• Far forward-mounted single mast
• Large four-sided gaff sail
• Short and wide with a large cockpit
• Usually between 20 and 30 feet in length
• Excellent workboats
• Tough and useful design
• Great for fishing
• Large cockpit and cabin
• Not ideal for offshore sailing
• Single sail offers less precise control
• Slow compared to other rigs
• Inland cruising

At first glance, a cutter is difficult to distinguish from a sloop. Both vessels have a single mast located in roughly the same position, but the sail plan is dramatically different. The cutter uses two headsails and often incorporates a large spar that extends from the bow (called a bowsprit).

The additional headsail is called a staysail. A sloop only carries one headsail, which is typically a jib. Cutter headsails have a lower center of gravity which provides superior performance in rough weather. It's more difficult to capsize a cutter, and they offer more precise control than a sloop. Cutters have more complex rigging, which is a disadvantage for some people.

Cutter Features:

• Two headsails
• Long bowsprit
• Similar to sloop
• Gaff or Bermuda-rigged
• Fast and efficient
• Offers precise control
• Superior rough-weather performance
• More complex than the sloop rig
• Harder to handle than simpler rigs

Perhaps the most majestic type of sailboat rig, the schooner is a multi-masted vessel with plenty of history and rugged seaworthiness. The schooner is typically gaff-rigged with short masts and multiple sails. Schooners are fast and powerful vessels with a complex rig. These sailboats have excellent offshore handling characteristics.

Schooners have a minimum of two masts, but some have three or more. The aftermost large sail is the mainsail, and the nearly identical forward sail is called the foresail. Schooners can have one or more headsail, which includes a cutter-style staysail. Some schooners have an additional smaller sale aft of the mainsail called the mizzen.

Schooner Features:

• At least two masts
• Usually gaff-rigged
• One or more headsails
• Excellent offshore handling
• Precise control
• Numerous sail options (headsails, topsails, mizzen)
• Fast and powerful
• Complex and labor-intensive rig
• Difficult to adjust rig single-handed
• Offshore fishing

Picture a ketch as a sloop or a cutter with an extra mast behind the mainsail. These vessels are seaworthy, powerful, excellent for offshore cruising. A ketch is similar to a yawl, except its larger mizzen doesn't hang off the stern. The ketch is either gaff or Bermuda-rigged.

Ketch-rigged sailboats have smaller sails, and thus, shorter masts. This makes them more durable and controllable in rough weather. The mizzen can help the boat steer itself, which is advantageous on offshore voyages. A ketch is likely slower than a sloop or a cutter, which means you aren't likely to find one winning a race.

Ketch Features:

• Headsail (or headsails), mainsail, and mizzen
• Mizzen doesn't extend past the rudder post
• Good offshore handling
• Controllable and mild
• Shorter and stronger masts
• Easy self-steering
• Slower than sloops and cutters
• Less common on the used market

A dinghy is a general term for a small sailboat of fewer than 28 feet overall. Dinghys are often dual-power boats, which means they usually have oars or a small outboard in addition to a sail. These small boats are open-top and only suitable for cruising in protected waters. Many larger sailboats have a deployable dinghy on board to get to shore when at anchor.

Dinghy Features:

• One or two people maximum capacity
• Easy to sail
• Works with oars, sails, or an outboard
• Great auxiliary boat
• Small and exposed
• Not suitable for offshore use
• Going from anchor to shore
• Protected recreational sailing (lakes, rivers, and harbors)

Best Sailboat Type for Stability

Stability is a factor that varies widely between sailboat types. There are different types of stability, and some sailors prefer one over another. For initial stability, the trimaran wins with little contest. This is because these vessels have a very high beam-to-length ratio, which makes them much less prone to rolling. Next up is the catamaran, which enjoys the same benefit from a wide beam but lacks the additional support of a center hull section.

It's clear that in most conditions, multihull vessels have the greatest stability. But what about in rough weather? And what about capsizing? Multihull sailboats are impossible to right after a knockdown. This is where full-keel monohull sailboats excel.

Traditional vessels with deep displacement keels are the safest and most stable in rough weather. The shape, depth, and weight of their keels keep them from knocking over and rolling excessively. In many cases, these sailboats will suffer a dismasting long before a knockdown. The primary disadvantage of deep-keeled sailboats is their tendency to heel excessively. This characteristic isn't hazardous, though it can make novice sailors nervous and reduce cabin comfort while underway.

Best Sailboat Type for Offshore Cruising

The best sailboat type for offshore cruising is the schooner. These graceful aid robust vessels have proven themselves over centuries as durable and capable vessels. They typically use deep displacement keels, which makes them stable in rough weather and easy to keep on course.

That said, the full answer isn't quite so simple. Modern multihull designs are an attractive option, and they have also proven to be strong and safe designs. Multihull sailboats are an increasingly popular option for offshore sailors, and they offer comfort that was previously unknown in the sailing community.

Many sailors cross oceans in basic Bermuda-rigged monohulls and take full advantage of a fin-keel design speed. At the end of the day, the best offshore cruising sailboat is whatever you are comfortable handling and living aboard. There are physical limits to all sailboat designs, though almost any vessel can make it across an ocean if piloted by a competent skipper and crew.

Best Sailboat Type for Racing The modern lightweight Bermuda-rigged sailboat is the king of the regatta. When designed with the right kind of hull, these vessels are some of the fastest sailboats ever developed. Many boats constructed between the 1970s and today incorporate these design features due to their favorable coastal and inland handling characteristics. Even small sailboats, such as the Cal 20 and the Catalina 22, benefit from this design. These boats are renowned for their speed and handling characteristics.

Related Articles

Daniel Wade

I've personally had thousands of questions about sailing and sailboats over the years. As I learn and experience sailing, and the community, I share the answers that work and make sense to me, here on Life of Sailing.

by this author

Learn About Sailboats

Most Recent

What Does "Sailing By The Lee" Mean?

October 3, 2023

The Best Sailing Schools And Programs: Reviews & Ratings

September 26, 2023

Important Legal Info

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies.

Similar Posts

Affordable Sailboats You Can Build at Home

September 13, 2023

Best Small Sailboat Ornaments

September 12, 2023

Discover the Magic of Hydrofoil Sailboats

December 11, 2023

Popular Posts

Best Liveaboard Catamaran Sailboats

December 28, 2023

Can a Novice Sail Around the World?

Elizabeth O'Malley

June 15, 2022

4 Best Electric Outboard Motors

How Long Did It Take The Vikings To Sail To England?

10 Best Sailboat Brands (And Why)

December 20, 2023

7 Best Places To Liveaboard A Sailboat

Get the best sailing content.

Top Rated Posts

© 2024 Life of Sailing Email: [email protected] Address: 11816 Inwood Rd #3024 Dallas, TX 75244 Disclaimer Privacy Policy

The Ultimate Guide to Sail Types and Rigs (with Pictures)

What's that sail for? Generally, I don't know. So I've come up with a system. I'll explain you everything there is to know about sails and rigs in this article.

What are the different types of sails? Most sailboats have one mainsail and one headsail. Typically, the mainsail is a fore-and-aft bermuda rig (triangular shaped). A jib or genoa is used for the headsail. Most sailors use additional sails for different conditions: the spinnaker (a common downwind sail), gennaker, code zero (for upwind use), and stormsail.

Each sail has its own use. Want to go downwind fast? Use a spinnaker. But you can't just raise any sail and go for it. It's important to understand when (and how) to use each sail. Your rigging also impacts what sails you can use.

On this page:

Different sail types, the sail plan of a bermuda sloop, mainsail designs, headsail options, specialty sails, complete overview of sail uses, mast configurations and rig types.

This article is part 1 of my series on sails and rig types. Part 2 is all about the different types of rigging. If you want to learn to identify every boat you see quickly, make sure to read it. It really explains the different sail plans and types of rigging clearly.

Guide to Understanding Sail Rig Types (with Pictures)

First I'll give you a quick and dirty overview of sails in this list below. Then, I'll walk you through the details of each sail type, and the sail plan, which is the godfather of sail type selection so to speak.

Click here if you just want to scroll through a bunch of pictures .

Here's a list of different models of sails: (Don't worry if you don't yet understand some of the words, I'll explain all of them in a bit)

• Jib - triangular staysail
• Genoa - large jib that overlaps the mainsail
• Spinnaker - large balloon-shaped downwind sail for light airs
• Gennaker - crossover between a Genoa and Spinnaker
• Code Zero or Screecher - upwind spinnaker
• Drifter or reacher - a large, powerful, hanked on genoa, but made from lightweight fabric
• Windseeker - tall, narrow, high-clewed, and lightweight jib
• Trysail - smaller front-and-aft mainsail for heavy weather
• Storm jib - small jib for heavy weather

I have a big table below that explains the sail types and uses in detail .

I know, I know ... this list is kind of messy, so to understand each sail, let's place them in a system.

The first important distinction between sail types is the placement . The mainsail is placed aft of the mast, which simply means behind. The headsail is in front of the mast.

Generally, we have three sorts of sails on our boat:

• Mainsail: The large sail behind the mast which is attached to the mast and boom
• Headsail: The small sail in front of the mast, attached to the mast and forestay (ie. jib or genoa)
• Specialty sails: Any special utility sails, like spinnakers - large, balloon-shaped sails for downwind use

The second important distinction we need to make is the functionality . Specialty sails (just a name I came up with) each have different functionalities and are used for very specific conditions. So they're not always up, but most sailors carry one or more of these sails.

They are mostly attached in front of the headsail, or used as a headsail replacement.

The specialty sails can be divided into three different categories:

• downwind sails - like a spinnaker
• light air or reacher sails - like a code zero
• storm sails

The parts of any sail

Whether large or small, each sail consists roughly of the same elements. For clarity's sake I've took an image of a sail from the world wide webs and added the different part names to it:

• Head: Top of the sail
• Tack: Lower front corner of the sail
• Foot: Bottom of the sail
• Luff: Forward edge of the sail
• Leech: Back edge of the sail
• Clew: Bottom back corner of the sail

So now we speak the same language, let's dive into the real nitty gritty.

Basic sail shapes

Roughly speaking, there are actually just two sail shapes, so that's easy enough. You get to choose from:

• square rigged sails
• fore-and-aft rigged sails

I would definitely recommend fore-and-aft rigged sails. Square shaped sails are pretty outdated. The fore-and-aft rig offers unbeatable maneuverability, so that's what most sailing yachts use nowadays.

Square sails were used on Viking longships and are good at sailing downwind. They run from side to side. However, they're pretty useless upwind.

A fore-and-aft sail runs from the front of the mast to the stern. Fore-and-aft literally means 'in front and behind'. Boats with fore-and-aft rigged sails are better at sailing upwind and maneuvering in general. This type of sail was first used on Arabic boats.

As a beginner sailor I confuse the type of sail with rigging all the time. But I should cut myself some slack, because the rigging and sails on a boat are very closely related. They are all part of the sail plan .

A sail plan is made up of:

• Mast configuration - refers to the number of masts and where they are placed
• Sail type - refers to the sail shape and functionality
• Rig type - refers to the way these sails are set up on your boat

There are dozens of sails and hundreds of possible configurations (or sail plans).

For example, depending on your mast configuration, you can have extra headsails (which then are called staysails).

The shape of the sails depends on the rigging, so they overlap a bit. To keep it simple I'll first go over the different sail types based on the most common rig. I'll go over the other rig types later in the article.

Bermuda Sloop: the most common rig

Most modern small and mid-sized sailboats have a Bermuda sloop configuration . The sloop is one-masted and has two sails, which are front-and-aft rigged. This type of rig is also called a Marconi Rig. The Bermuda rig uses a triangular sail, with just one side of the sail attached to the mast.

The mainsail is in use most of the time. It can be reefed down, making it smaller depending on the wind conditions. It can be reefed down completely, which is more common in heavy weather. (If you didn't know already: reefing is skipper terms for rolling or folding down a sail.)

In very strong winds (above 30 knots), most sailors only use the headsail or switch to a trysail.

The headsail powers your bow, the mainsail powers your stern (rear). By having two sails, you can steer by using only your sails (in theory - it requires experience). In any case, two sails gives you better handling than one, but is still easy to operate.

Let's get to the actual sails. The mainsail is attached behind the mast and to the boom, running to the stern. There are multiple designs, but they actually don't differ that much. So the following list is a bit boring. Feel free to skip it or quickly glance over it.

• Square Top racing mainsail - has a high performance profile thanks to the square top, optional reef points
• Racing mainsail - made for speed, optional reef points
• Cruising mainsail - low-maintenance, easy to use, made to last. Generally have one or multiple reef points.
• Full-Batten Cruising mainsail - cruising mainsail with better shape control. Eliminates flogging. Full-length battens means the sail is reinforced over the entire length. Generally have one or multiple reef points.
• High Roach mainsail - crossover between square top racing and cruising mainsail, used mostly on cats and multihulls. Generally have one or multiple reef points.
• Mast Furling mainsail - sails specially made to roll up inside the mast - very convenient but less control; of sail shape. Have no reef points
• Boom Furling mainsail - sails specially made to roll up inside the boom. Have no reef points.

The headsail is the front sail in a front-and-aft rig. The sail is fixed on a stay (rope, wire or rod) which runs forward to the deck or bowsprit. It's almost always triangular (Dutch fishermen are known to use rectangular headsail). A triangular headsail is also called a jib .

Headsails can be attached in two ways:

• using roller furlings - the sail rolls around the headstay
• hank on - fixed attachment

Types of jibs:

Typically a sloop carries a regular jib as its headsail. It can also use a genoa.

• A jib is a triangular staysail set in front of the mast. It's the same size as the fore-triangle.
• A genoa is a large jib that overlaps the mainsail.

What's the purpose of a jib sail? A jib is used to improve handling and to increase sail area on a sailboat. This helps to increase speed. The jib gives control over the bow (front) of the ship, making it easier to maneuver the ship. The mainsail gives control over the stern of the ship. The jib is the headsail (frontsail) on a front-and-aft rig.

The size of the jib is generally indicated by a number - J1, 2, 3, and so on. The number tells us the attachment point. The order of attachment points may differ per sailmaker, so sometimes J1 is the largest jib (on the longest stay) and sometimes it's the smallest (on the shortest stay). Typically the J1 jib is the largest - and the J3 jib the smallest.

Most jibs are roller furling jibs: this means they are attached to a stay and can be reefed down single-handedly. If you have a roller furling you can reef down the jib to all three positions and don't need to carry different sizes.

Originally called the 'overlapping jib', the leech of the genoa extends aft of the mast. This increases speed in light and moderate winds. A genoa is larger than the total size of the fore-triangle. How large exactly is indicated by a percentage.

• A number 1 genoa is typically 155% (it used to be 180%)
• A number 2 genoa is typically 125-140%

Genoas are typically made from 1.5US/oz polyester spinnaker cloth, or very light laminate.

This is where it gets pretty interesting. You can use all kinds of sails to increase speed, handling, and performance for different weather conditions.

Some rules of thumb:

• Large sails are typically good for downwind use, small sails are good for upwind use.
• Large sails are good for weak winds (light air), small sails are good for strong winds (storms).

Downwind sails

Thanks to the front-and-aft rig sailboats are easier to maneuver, but they catch less wind as well. Downwind sails are used to offset this by using a large sail surface, pulling a sailboat downwind. They can be hanked on when needed and are typically balloon shaped.

Here are the most common downwind sails:

• Big gennaker
• Small gennaker

A free-flying sail that fills up with air, giving it a balloon shape. Spinnakers are generally colorful, which is why they look like kites. This downwind sail has the largest sail area, and it's capable of moving a boat with very light wind. They are amazing to use on trade wind routes, where they can help you make quick progress.

Spinnakers require special rigging. You need a special pole and track on your mast. You attach the sail at three points: in the mast head using a halyard, on a pole, and on a sheet.

The spinnaker is symmetrical, meaning the luff is as long as its leech. It's designed for broad reaching.

Gennaker or cruising spinnaker

The Gennaker is a cross between the genoa and the spinnaker. It has less downwind performance than the spinnaker. It is a bit smaller, making it slower, but also easier to handle - while it remains very capable. The cruising spinnaker is designed for broad reaching.

The gennaker is a smaller, asymmetric spinnaker that's doesn't require a pole or track on the mast. Like the spinnaker, and unlike the genoa, the gennaker is set flying. Asymmetric means its luff is longer than its leech.

You can get big and small gennakers (roughly 75% and 50% the size of a true spinnaker).

Also called ...

• the cruising spinnaker
• cruising chute
• pole-less spinnaker
• SpinDrifter

... it's all the same sail.

Light air sails

There's a bit of overlap between the downwind sails and light air sails. Downwind sails can be used as light air sails, but not all light air sails can be used downwind.

Here are the most common light air sails:

• Spinnaker and gennaker

Drifter reacher

Code zero reacher.

A drifter (also called a reacher) is a lightweight, larger genoa for use in light winds. It's roughly 150-170% the size of a genoa. It's made from very lightweight laminated spinnaker fabric (1.5US/oz).

Thanks to the extra sail area the sail offers better downwind performance than a genoa. It's generally made from lightweight nylon. Thanks to it's genoa characteristics the sail is easier to use than a cruising spinnaker.

The code zero reacher is officially a type of spinnaker, but it looks a lot like a large genoa. And that's exactly what it is: a hybrid cross between the genoa and the asymmetrical spinnaker (gennaker). The code zero however is designed for close reaching, making it much flatter than the spinnaker. It's about twice the size of a non-overlapping jib.

A windseeker is a small, free-flying staysail for super light air. It's tall and thin. It's freestanding, so it's not attached to the headstay. The tack attaches to a deck pad-eye. Use your spinnakers' halyard to raise it and tension the luff.

It's made from nylon or polyester spinnaker cloth (0.75 to 1.5US/oz).

It's designed to guide light air onto the lee side of the main sail, ensuring a more even, smooth flow of air.

Stormsails are stronger than regular sails, and are designed to handle winds of over 45 knots. You carry them to spare the mainsail. Sails

A storm jib is a small triangular staysail for use in heavy weather. If you participate in offshore racing you need a mandatory orange storm jib. It's part of ISAF's requirements.

A trysail is a storm replacement for the mainsail. It's small, triangular, and it uses a permanently attached pennant. This allows it to be set above the gooseneck. It's recommended to have a separate track on your mast for it - you don't want to fiddle around when you actually really need it to be raised ... now.

Why Use Different Sails At All?

You could just get the largest furling genoa and use it on all positions. So why would you actually use different types of sails?

The main answer to that is efficiency . Some situations require other characteristics.

Having a deeply reefed genoa isn't as efficient as having a small J3. The reef creates too much draft in the sail, which increases heeling. A reefed down mainsail in strong winds also increases heeling. So having dedicated (storm) sails is probably a good thing, especially if you're planning more demanding passages or crossings.

But it's not just strong winds, but also light winds that can cause problems. Heavy sails will just flap around like laundry in very light air. So you need more lightweight fabrics to get you moving.

What Are Sails Made Of?

The most used materials for sails nowadays are:

• Dacron - woven polyester
• woven nylon
• laminated fabrics - increasingly popular

Sails used to be made of linen. As you can imagine, this is terrible material on open seas. Sails were rotting due to UV and saltwater. In the 19th century linen was replaced by cotton.

It was only in the 20th century that sails were made from synthetic fibers, which were much stronger and durable. Up until the 1980s most sails were made from Dacron. Nowadays, laminates using yellow aramids, Black Technora, carbon fiber and Spectra yarns are more and more used.

Laminates are as strong as Dacron, but a lot lighter - which matters with sails weighing up to 100 kg (220 pounds).

By the way: we think that Viking sails were made from wool and leather, which is quite impressive if you ask me.

In this section of the article I give you a quick and dirty summary of different sail plans or rig types which will help you to identify boats quickly. But if you want to really understand it clearly, I really recommend you read part 2 of this series, which is all about different rig types.

You can't simply count the number of masts to identify rig type But you can identify any rig type if you know what to look for. We've created an entire system for recognizing rig types. Let us walk you through it. Read all about sail rig types

As I've said earlier, there are two major rig types: square rigged and fore-and-aft. We can divide the fore-and-aft rigs into three groups:

• Bermuda rig (we have talked about this one the whole time) - has a three-sided mainsail
• Gaff rig - has a four-sided mainsail, the head of the mainsail is guided by a gaff
• Lateen rig - has a three-sided mainsail on a long yard

There are roughly four types of boats:

• one masted boats - sloop, cutter
• two masted boats - ketch, schooner, brig
• three masted - barque
• fully rigged or ship rigged - tall ship

Everything with four masts is called a (tall) ship. I think it's outside the scope of this article, but I have written a comprehensive guide to rigging. I'll leave the three and four-masted rigs for now. If you want to know more, I encourage you to read part 2 of this series.

One-masted rigs

Boats with one mast can have either one sail, two sails, or three or more sails.

The 3 most common one-masted rigs are:

• Cat - one mast, one sail
• Sloop - one mast, two sails
• Cutter - one mast, three or more sails

1. Gaff Cat

2. Gaff Sloop

Two-masted rigs

Two-masted boats can have an extra mast in front or behind the main mast. Behind (aft of) the main mast is called a mizzen mast . In front of the main mast is called a foremast .

The 5 most common two-masted rigs are:

• Lugger - two masts (mizzen), with lugsail (cross between gaff rig and lateen rig) on both masts
• Yawl - two masts (mizzen), fore-and-aft rigged on both masts. Main mast much taller than mizzen. Mizzen without mainsail.
• Ketch - two masts (mizzen), fore-and-aft rigged on both masts. Main mast with only slightly smaller mizzen. Mizzen has mainsail.
• Schooner - two masts (foremast), generally gaff rig on both masts. Main mast with only slightly smaller foremast. Sometimes build with three masts, up to seven in the age of sail.
• Brig - two masts (foremast), partially square-rigged. Main mast carries small lateen rigged sail.

4. Schooner

5. Brigantine

This article is part 1 of a series about sails and rig types If you want to read on and learn to identify any sail plans and rig type, we've found a series of questions that will help you do that quickly. Read all about recognizing rig types

Related Questions

What is the difference between a gennaker & spinnaker? Typically, a gennaker is smaller than a spinnaker. Unlike a spinnaker, a gennaker isn't symmetric. It's asymmetric like a genoa. It is however rigged like a spinnaker; it's not attached to the forestay (like a jib or a genoa). It's a downwind sail, and a cross between the genoa and the spinnaker (hence the name).

What is a Yankee sail? A Yankee sail is a jib with a high-cut clew of about 3' above the boom. A higher-clewed jib is good for reaching and is better in high waves, preventing the waves crash into the jibs foot. Yankee jibs are mostly used on traditional sailboats.

How much does a sail weigh? Sails weigh anywhere between 4.5-155 lbs (2-70 kg). The reason is that weight goes up exponentially with size. Small boats carry smaller sails (100 sq. ft.) made from thinner cloth (3.5 oz). Large racing yachts can carry sails of up to 400 sq. ft., made from heavy fabric (14 oz), totaling at 155 lbs (70 kg).

What's the difference between a headsail and a staysail? The headsail is the most forward of the staysails. A boat can only have one headsail, but it can have multiple staysails. Every staysail is attached to a forward running stay. However, not every staysail is located at the bow. A stay can run from the mizzen mast to the main mast as well.

What is a mizzenmast? A mizzenmast is the mast aft of the main mast (behind; at the stern) in a two or three-masted sailing rig. The mizzenmast is shorter than the main mast. It may carry a mainsail, for example with a ketch or lugger. It sometimes doesn't carry a mainsail, for example with a yawl, allowing it to be much shorter.

Special thanks to the following people for letting me use their quality photos: Bill Abbott - True Spinnaker with pole - CC BY-SA 2.0 lotsemann - Volvo Ocean Race Alvimedica and the Code Zero versus SCA and the J1 - CC BY-SA 2.0 Lisa Bat - US Naval Academy Trysail and Storm Jib dry fit - CC BY-SA 2.0 Mike Powell - White gaff cat - CC BY-SA 2.0 Anne Burgess - Lugger The Reaper at Scottish Traditional Boat Festival

Hi, I stumbled upon your page and couldn’t help but notice some mistakes in your description of spinnakers and gennakers. First of all, in the main photo on top of this page the small yacht is sailing a spinnaker, not a gennaker. If you look closely you can see the spinnaker pole standing on the mast, visible between the main and headsail. Further down, the discription of the picture with the two German dinghies is incorrect. They are sailing spinnakers, on a spinnaker pole. In the farthest boat, you can see a small piece of the pole. If needed I can give you the details on the difference between gennakers and spinnakers correctly?

Hi Shawn, I am living in Utrecht I have an old gulf 32 and I am sailing in merkmeer I find your articles very helpful Thanks

Thank you for helping me under stand all the sails there names and what there functions were and how to use them. I am planning to build a trimaran 30’ what would be the best sails to have I plan to be coastal sailing with it. Thank you

Hey Comrade!

Well done with your master piece blogging. Just a small feedback. “The jib gives control over the bow of the ship, making it easier to maneuver the ship. The mainsail gives control over the stern of the ship.” Can you please first tell the different part of a sail boat earlier and then talk about bow and stern later in the paragraph. A reader has no clue on the newly introduced terms. It helps to keep laser focused and not forget main concepts.

Shawn, I am currently reading How to sail around the World” by Hal Roth. Yes, I want to sail around the world. His book is truly grounded in real world experience but like a lot of very knowledgable people discussing their area of expertise, Hal uses a lot of terms that I probably should have known but didn’t, until now. I am now off to read your second article. Thank You for this very enlightening article on Sail types and their uses.

Shawn Buckles

HI CVB, that’s a cool plan. Thanks, I really love to hear that. I’m happy that it was helpful to you and I hope you are of to a great start for your new adventure!

Hi GOWTHAM, thanks for the tip, I sometimes forget I haven’t specified the new term. I’ve added it to the article.

Nice article and video; however, you’re mixing up the spinnaker and the gennaker.

A started out with a question. What distinguishes a brig from a schooner? Which in turn led to follow-up questions: I know there are Bermuda rigs and Latin rig, are there more? Which in turn led to further questions, and further, and further… This site answers them all. Wonderful work. Thank you.

Great post and video! One thing was I was surprised how little you mentioned the Ketch here and not at all in the video or chart, and your sample image is a large ship with many sails. Some may think Ketch’s are uncommon, old fashioned or only for large boats. Actually Ketch’s are quite common for cruisers and live-aboards, especially since they often result in a center cockpit layout which makes for a very nice aft stateroom inside. These are almost exclusively the boats we are looking at, so I was surprised you glossed over them.

Love the article and am finding it quite informative.

While I know it may seem obvious to 99% of your readers, I wish you had defined the terms “upwind” and “downwind.” I’m in the 1% that isn’t sure which one means “with the wind” (or in the direction the wind is blowing) and which one means “against the wind” (or opposite to the way the wind is blowing.)

paul adriaan kleimeer

like in all fields of syntax and terminology the terms are colouual meaning local and then spead as the technology spread so an history lesson gives a floral bouque its colour and in the case of notical terms span culture and history adds an detail that bring reverence to the study simply more memorable.

Hi, I have a small yacht sail which was left in my lock-up over 30 years ago I basically know nothing about sails and wondered if you could spread any light as to the make and use of said sail. Someone said it was probably originally from a Wayfayer wooden yacht but wasn’t sure. Any info would be must appreciated and indeed if would be of any use to your followers? I can provide pics but don’t see how to include them at present

kind regards

Leave a comment

You may also like, 17 sailboat types explained: how to recognize them.

Ever wondered what type of sailboat you're looking at? Identifying sailboats isn't hard, you just have to know what to look for. In this article, I'll help you.

How Much Sailboats Cost On Average (380+ Prices Compared)

The Sailing Ship Adventure of a Lifetime

An around-the-world circumnavigation. your adventure awaits....

The Barque  Picton Castle is a three-masted tall ship based in Lunenburg, Nova Scotia, Canada and best known for our adventurous international deep sea voyages under sail. Almost anyone can become a trainee crew member, no experience required, just a desire to become part of the crew that sails the ship. With the guidance of our experienced staff crew, you’ll literally learn the ropes. Join us as a trainee crew member on the Around the World Voyage 2023-2024. Sign aboard for three, six or nine months, or for the full year+ voyage. Sail in the tradewinds to Panama, Galapagos Islands, Pitcairn Island, the South Pacific islands of Tahiti and French Polynesia, Tonga, Fiji, Vanuatu. Then on to Bali and the Indian Ocean and Reunion Island, then South Africa, St. Helena, islands of the Caribbean and Bermuda, making tradewind passages under sail. The Picton Castle is an inspected and certified sail training ship dedicated to deep sea sail training sailing the oceans of the world and meeting folks in their own lands on their term

The satisfaction of knowing you are sailing the sea with no engine generating noise, looking up and all the sails are set, you can hear the water rippling past, and you know that you and your watch, together with the other two watches have heaved and set and trimmed them all by hand, the way that has been done for hundreds of years - muscle and sweat and teamwork. It's amazing.

- peter b., picton castle crew, learn about more exciting opportunities the picton castle has to offer.

THE BOSUN SCHOOL

The Picton Castle ’s Bosun School is a land-based marine skills enrichment program for advancing mariners. The purpose of the Picton Castle ’s Bosun School is to provide an opportunity to young, dedicated mariners to advance their hand skills – such as rope and rigging, sailmaking, general seamanship, working aloft and small craft handling – in a concentrated fashion without the natural demands and distractions of being underway at sea. Designed and conducted by Captain Daniel Moreland and special guest instructors, the Bosun School allows you to significantly advance your skill levels. Once signed aboard your next ship you will have that much more to offer and will be a greater contributor to helping the ship on her mission – which is, after all, what being crew is all about.

THE CHANDLERY

2019 saw the opening of our Ship & Boat Chandlery at our storefront at 174 Bluenose Drive, Lunenburg, NS.  The Chandlery features an emporium of marine tools & supplies, handy, useful, hard-to-find, exotic and frivolous nautical items, and handmade treasures from around the world brought to Lunenburg aboard the Barque Picton Castle !

The Chandlery also has an active online store, available to shoppers around the world at  http://picton-castle.myshopify.com/

THE CAPTAIN'S LOG

The Captain’s Log is a collection of stories, articles, news and updates written by the Captain Daniel Moreland, crew of the Barque Picton Castle , alumni, and special guests.

Whether the Picton Castle is at port in Lunenburg, NS or travelling across the world, there are always lots of stories to be told. From ocean crossings to sandy beaches and tropical ports, from Bosun School workshops to events at The Chandlery, visit the Captain’s Log to follow the Picton Castle ‘s amazing adventures!

The Captain’s Log – Recent Posts

Picton Castle's base of operations in Lunenburg, Nova Scotia, Canada

• Search Please fill out this field.
• Newsletters
• Water Sports

The Various Types of Sailboats and Rigs

 Aditya Adjie / EyeEm / Getty Images

The Modern Sloop

The most common type of small-to-midsize sailboat is the sloop. The rig is one mast and two sails. The mainsail is a tall, triangular sail mounted to the mast at its leading edge, with the foot of the sail along the boom, which extends aft from the mast. The sail in front called the jib or sometimes the headsail, mounts on the forestay between the bow and the masthead, with its trailing corner controlled by the jib sheet.

The Bermuda or Marconi Rig

These tall triangular sails are called the Bermuda rig, or sometimes the Marconi rig, named for their development more than two centuries ago in Bermudan boats. Because of the physics of how force is generated by wind blowing past a sail, tall thin sails generally have more power when the boat is sailing into the wind.

Racing Sloop

Gail Oskin / Getty Images

Here is another example of a sloop with a Bermuda rig. This is PUMA Ocean Racing's il Mostro, one of the fastest monohull sailboats in the world, in the 2008/2009 Volvo Ocean Race. The sails are much bigger than found on most cruising sailboats, but the general rig is the same. In both of the sloops shown so far, the jib reaches to the top of the masthead. These are sometimes called masthead sloops.

Fractional Sloop Rig

Ahunt [CC0] / Wikimedia Commons

Here, notice a small racing dinghy with a sloop rig. This is still a Bermuda rig, but the mainsail is proportionally larger and the jib smaller, for ease of handling and maximum power. Note that the top of the jib rises only a fraction of the distance to the masthead. Such a rig is called a fractional sloop.

KenWiedemann / Getty Images

While a sloop always has two sails, a cat-rigged boat generally has only one. The mast is positioned very far forward, almost at the bow, making room for a very long-footed mainsail. The mainsail of a cat rig may have a traditional boom or, as in this boat, a loose-footed mainsail attached at the aft corner to what is called a wishbone boom.

Compared to Bermuda Rigs

A primary advantage of a cat rig is the ease of sail handling, such as not having to deal with jib sheets when tacking. Generally, a cat rig is not considered as powerful as a Bermuda rig, however, and is more rarely used in modern boats.

Cat-Rigged Racing Dinghy

technotr / Getty Images

In this photo, there is another cat rig, which works well on small racing dinghies like this Laser. With a small boat and one sailor, a cat rig has the advantages of being simple to trim and very maneuverable when racing.​

John White Photos / Getty Images

A popular rig for midsize cruising boats is the ketch, which is like a sloop with a second, smaller mast set aft called the mizzenmast. The mizzen sail functions much like a second mainsail. A ketch carries about the same total square footage of sail area as a sloop of the equivalent size.

Make Sail Handling Easy

The primary advantages of a ketch are that each of the sails is usually somewhat smaller than on a sloop of equivalent size, making sail handling easier. Smaller sails are lighter, easier to hoist and trim and smaller to stow. Having three sails also allows for more flexible sail combinations. For example, with the wind at an intensity that a sloop might have to double-reef the main to reduce sail area, a ketch may sail very well under just jib and mizzen. This is popularly called sailing under “jib and jigger”—the jigger being an old square-rigger term for the aft-most mast flying a triangular sail.

While a ketch offers these advantages to cruisers, they may also be more expensive because of the added mast and sail. The sloop rig is also considered faster and is therefore used almost exclusively in racing sailboats.

Public Domain

A yawl is very similar to a ketch. The mizzenmast is usually smaller and sets farther aft, behind the rudder post, while in a ketch the mizzenmast is forward of the rudder post. Aside from this technical difference, the yawl and ketch rigs are similar and have similar advantages and disadvantages.

Tomás Fano [ CC BY-SA 2.0 ], via Wikimedia Commons

A typical schooner has two masts, and sometimes more, but the masts are positioned more forward in the boat. Unlike in a ketch or yawl, the forward mast is smaller than the aft mast (or sometimes the same size). One or more jibs may fly forward of the foremast.

Traditional Schooners

While some modern schooners may use triangular, Bermuda-like sails on one or both masts, traditional schooners like the one shown here have gaff-rigged sails. At the top of the sail is a short spar called the gaff, which allows the sail to extend back along a fourth side, gaining size over a triangular sail of the same height.

Gaff-rigged schooners are still seen in many areas and are well loved for their historic appearance and sweeping lines, but they are seldom used anymore for private cruising. The gaff rig is not as efficient as the Bermuda rig, and the rig is more complicated and requires more crew for sail handling.

Schooner With Topsail and Flying Jibs

  Print Collector   / Getty Images

Above is another gaff-rigged schooner that is using a topsail and several flying jibs. Tacking or gybing a complicated sail plan like this takes a lot of crew and expertise.

Square-Rigged Tall Ship

Bettmann  / Getty Images

In this illustration, notice a large three-masted square-rigger flying five tiers of square sails, several headsails, and a mizzen sail. Although this is a modern ship, one of many still used around the world for sail training and passenger cruise ships, the rig is essentially unchanged from centuries ago. Columbus, Magellan, and the other early sea explorers sailed in square-riggers.

Generating Power

Remarkably efficient sailing downwind or well off the wind, square sails do not generate power from their leading edge as in the Bermuda rig, which has become predominant in modern times. Thus, square-riggers generally do not sail upwind. It was due to this limitation that the great trade wind sailing routes around the world were developed centuries ago.

Related Articles

More related articles.

The global authority in superyachting

• NEWSLETTERS
• Yachts Home
• The Superyacht Directory
• Yacht Reports
• Brokerage News
• The largest yachts in the world
• The Register
• Yacht Advice
• Yacht Design
• 12m to 24m yachts
• Monaco Yacht Show
• Builder Directory
• Designer Directory
• Interior Design Directory
• Naval Architect Directory
• Yachts for sale home
• Motor yachts
• Sailing yachts
• Explorer yachts
• Classic yachts
• Sale Broker Directory
• Charter Home
• Yachts for Charter
• Charter Destinations
• Charter Broker Directory
• Destinations Home
• Mediterranean
• South Pacific
• Rest of the World
• Boat Life Home
• Owners' Experiences
• Conservation and Philanthropy
• Interiors Suppliers
• Owners' Club
• Captains' Club
• BOAT Showcase
• Boat Presents
• Events Home
• World Superyacht Awards
• Superyacht Design Festival
• Design and Innovation Awards
• Young Designer of the Year Award
• Artistry and Craft Awards
• Explorer Yachts Summit
• Ocean Talks
• The Ocean Awards
• BOAT Connect
• Between the bays
• Golf Invitational
• BOATPro Home
• Superyacht Insight
• Global Order Book
• Premium Content
• Product Features
• Testimonials
• Pricing Plan
• Tenders & Equipment

Top 10 largest sailing yachts in the world

The list of the top ten largest sailing yachts in the world is not easily disrupted. In fact, it had remained unchanged since the launch of the 106.7-metre Oceanco Black Pearl in 2018, which swiped the top spot from Lürssen 's 93-metre Eos . For four years, Black Pearl remained the largest yacht in the world until early in 2023 when Oceanco sent a new flagship down the slipway, the mighty 127-metre Koru . Read on to discover our official list of the largest sailing yachts in the world. 

1. Koru | 127m

Leading this list is a new entry: Oceanco 's record-breaking 127-metre sailing yacht Koru . Commissioned by Amazon founder Jeff Bezos, Koru has been the subject of much speculation for years but was revealed in all its glory in 2021. Not only is she the largest sailing yacht in the world, she is also the largest superyacht ever to be built in the Netherlands. Her name, Koru, is the Māori word meaning "new beginnings" and she is accompanied by a 75-metre support vessel named Abeona . She was delivered in 2023 and is over 20 metres longer than the former title-holder Black Pearl.

• Builder: Oceanco
• Country of build: Netherlands
• Delivery year: 2023
• Length Overall: 125.82 m
• Beam: 16.95 m
• Gross Tonnage 3493 t

More about this yacht

More stories, 2. black pearl | 106.7m.

Instantly recognisable with her black sails and Dynarig set-up, Black Pearl is the second-largest sailing yacht in the world. Delivered during the same year as 142.81-metre Sailing Yacht A (officially designated as a sail-assisted motor yacht), Black Pearl spent five years in development at Dutch yard Oceanco . Dykstra Naval Architects , Ken Freivokh , Nuvolari Lenard , BMT Nigel Gee and Gerard P Villate all contributed their expertise to this monumental project, which looks set to turn heads the world over for decades to come. She is often compared to Maltese Falcon , the first Dynarig superyacht, but boasts a number of technological advancements. She flies 25 per cent more sail area with hinging spars that fold down to allow her to pass through the Panama Canal, but it is what lies beneath that really counts. Two variable pitch propellers harness kinetic energy while she is under sail, which can run the hotel or recharge the batteries, allowing her to cross oceans without expending a drop of fuel. 

• Delivery year: 2018
• Length Overall: 106.7 m
• Gross Tonnage 2700 t

3. Eos | 92.93m

Eos was built in Germany under a cloak of secrecy for her American media and movie mogul Barry Diller. Eos is a three-masted Bermuda rigged schooner and was refitted at Royal Huisman in 2011. After emerging from her refit the yacht caught fire in Norway and had to return to the yard to be repaired.

• Builder: Lurssen
• Country of build: Germany
• Delivery year: 2006
• Length Overall: 92.93 m
• Beam: 13.5 m
• Gross Tonnage 1500 t

4. Athena | 90m

Athena was built by the Royal Huisman in Holland for US software developer Jim Clark. Athena's advanced engineering means that she is able to sail in relatively light airs, while still offering the interior space typically only found on motor yachts. In stronger winds, Athena has been credited as attaining 19 knots under sail. The yacht's three closed decks include a large owner's suite, four guest suites, a saloon and dining room on the main deck and a sky lounge on the upper deck. Her clipper-bow and three-masted schooner sprung from the boards of Pieter Beeldsnijder (exterior styling) and Dykstra Naval Architects (naval architecture).

• Builder: Royal Huisman
• Delivery year: 2004
• Length Overall: 90 m
• Beam: 12.2 m
• Gross Tonnage 1103 t

5. Maltese Falcon | 88m

Maltese Falcon  was built for the late American venture capitalist Tom Perkins. The iconic three-masted schooner is the fifth-largest sailing yacht in the world. Maltese Falcon's rig is made up of three unstayed, 'weapons-grade' carbon fibre masts, with a fully computerised sail and rotating mast system. The system has been dubbed a triumph of design, development and engineering and Maltese Falcon has topped an impressive 24 knots under sail. The Ken Freivokh interior is a marriage of industrial chic and high tech. It features leather, glass, wood and steel as well as a modern art collection. The yacht has accommodation for 12 guests and is available for charter.

• Builder: Perini Navi
• Country of build: Turkey
• Length Overall: 88 m
• Beam: 12.47 m
• Gross Tonnage 1112 t

Yachts for charter

6. aquijo | 85.9m.

The highly anticipated Aquijo was the result of a collaboration between Vitters and Oceanco. Both Dutch yards worked closely with the owner's representative to create a highly complex, performance-driven sailing machine that became the third largest sailing superyacht when launched. Aquijo is an aluminium ketch-rigged yacht, and features a custom steering system. Aquijo's interior layout provides clear sight lines thanks to her high-volume superstructure.

• Builder: Vitters | Oceanco
• Delivery year: 2016
• Length Overall: 85.9 m
• Beam: 14.48 m
• Gross Tonnage 1538 t

7. Sea Eagle II | 81m

Delivered in 2020, Sea Eagle II is the most recent addition to the top ten largest sailing yachts in the world. Built by Royal Huisman, Sea Eagle II features exterior styling by Mark Whiteley and naval architecture penned by Dykstra Naval Architects . Sold in summer 2016 by  Northrop & Johnson  as Project RH400,  Sea Eagle II  is the largest yacht ever built by the Dutch yard. 

• Delivery year: 2020
• Length Overall: 81 m
• Gross Tonnage 1150 t

8. M5 | 78.4m

Built by Vosper Thorneycroft in Southampton, England, M5  was launched as the iconic yacht Mirabella V in 2004. She remains the world’s largest sloop to date. M5 was designed by Ron Holland for American yachtsman Joe Vittoria, who enjoyed sailing her for seven years before she was sold on. The new owner renamed her M5 and she was extended by 3.2 metres in a refit at  Pendennis  before her relaunch in 2013. Her most recent refit , however, in 2019, saw M5 emerge from the sheds with all new paint-work, composite biminis, a reinforced mast and a new bow-thruster.

M5 has a displacement of 780 tonnes (165 tonnes of which is the keel). The carbon fibre mast is an amazing 88.3 metres tall and can carry approximately 3,700 square metres of sail.

• Builder: Vosper Thornycroft
• Country of build: United Kingdom
• Length Overall: 78.4 m
• Beam: 14.8 m
• Gross Tonnage 1009 t

9. Badis | 70m

The second largest Perini Navi sailing yacht to date, Badis was built for the multiple superyacht owner Bill Duker and launched in 2016 as Sybaris . The name comes from a Greek settlement in ancient Italy that was famed for its hedonism, feasts and excesses. Featuring naval architecture and sailplan optimisation by Philippe Briand, this all-aluminium ketch can host up to 12 guests across six cabins. Interiors are by PH Design with a total internal volume of 870GT, while the crew quarters allow for a staff of up to 11. Under power, Badis's twin MTU 16V 2000 M72 diesel engines generate a total of 3,860hp, resulting in a top speed of 17.5 knots and a maximum cruising range of 5,000 nautical miles at 12.5 knots.

• Country of build: Italy
• Length Overall: 70 m
• Beam: 13.24 m
• Gross Tonnage 887 t

10. Atlantic | 69.3m

Atlantic might have the looks of an old classic but don't be fooled, this modern three-masted schooner was delivered in 2010 to an owner with a penchant for classic sailing yachts. She was built from scratch as a replica of the famous 64.5-metre Townsend & Downey schooner by the same name built in 1903. The sailing yacht made history when she set the record for the fastest Atlantic crossing in 1905 - a record that remained unbroken for nearly 100 years - but she was sadly scrapped in 1982. Inspired by its legacy, owner Ed Kastelein built a replica as a tribute to the record-breaking classic at the Van de Graaf shipyard in the Netherlands. The new Atlantic 's three masts stand 50 metres high and support 1,700 square metres of sails with 36 winches in bronze built specially by Harken.

• Builder: Van der Graaf
• Delivery year: 2010
• Length Overall: 69.31 m
• Gross Tonnage 268 t

Yachts for sale

Sponsored listings.

The 15 Different Types Of Sailing Ships

The 15 types of sailing ships are listed below.

• The Schooner
• The Carrack
• The Brigantine
• The Barquentine
• The Clipper
• The Windjammer
• The Fully Rigged Ship

Throughout centuries, there have been many different types of sailing ships seen from harbors and coastlines around the world.

This article will show the various types of sailing vessels that have made their mark in maritime history and we showcase their purposes and why they are still remarkable feats of marine engineering.

The different sizes, shapes, and masts of the ships required different numbers of sailors to handle them and each type of ship was crafted with a different purpose in mind.

All ships are unique with no two types of ships being the same with each coming with its own experiences, features and requirements.

1. The Schooner

The Schooner sailing vessel, with an average size of 46m (152 feet) in length, was developed in the early 17th century and first used by the Dutch.

The ship came with fore and aft sails and they were created to operate in the toughest of wind and ocean conditions.

The Schooner was a multi-purpose sailing vessel used for transporting slaves to transporting cargo and it was used for fishing and racing too.

There are 5 different schooner types that are characterized by their rig configurations listed below.

• Tern schooner : This was a 3-masted schooner most popular between 1880 and 1920 capable of carrying up to 400 tons in cargo and it required a crew of 6-8 people
• 4-6 masts schooner : These schooners spread the sail area over smaller sails
• Grand Bank Fishing schooner : Similar to the famous Bluenose, it carries the main gaff topsail and a fisherman's staysail set between the masts.
• Square Topsail schooner : This was a combination of fore and aft sails and small square sails, most popularly used for coastal cargo transportation in the 1800s
• Coastal schooner : This was a coastal schooner sailing ship used for carrying goods and general cargo to nearby islands along the coast ( 1 )

The 19th Century schooner came with two or three masts, the one at the fore being shorter than the others.

Modern schooners, with Bermuda rigged sails, remain powerful, economical coastal liners traversing the Pacific.

Famous schooner sailing ships are listed below.

• America : The Schooner named " America " was designed for racing and it became the first winner of the America's Cup international sailing trophy ( 2 )
• Thomas W Lawson : The schooner “ Thomas W Lawson ” had a unique seven masts, with interchangeable sails and gear
• Wawona : The schooner " Wawona " was one of the largest lumber carriers and fishing vessels between 1897 and 1947

2. The Carrack

The Carrack, developed in the 14th and 15th centuries with the first built in Portugal, is a nautically-rigged wooden ship with three or four masts each having square sails or triangular sails and it was heavily used between the 14th to 15th Centuries and remained popular until the 18th Century. It is the sailing ship Christopher Columbus used to sail the world.

It was the largest ship in Europe with the Spanish Carrack being more than 1,000 tons in weight and 150 feet (45 meters) in length. More modern versions of the Carrack were developed by the Portuguese and they could hold up to 2,000 tons. ( 3 ).

The Carrack had 4 decks with the lower 2 used for cargo, the 3rd was for accommodation and the 4th was for cargo owned by the crew ( 4 ) and this bulky ship was the standard trading ship along the Baltic, Mediterranean, Asian, and Atlantic coasts in the mid-16th century useful for carrying cargo across seas.

The Carrack had a strange shape which made it cumbersome to sail close to the wind and after a lot of engineering experiments, parts of the ship were stripped off giving the ship a high stern and a low bow.

The modern Carrack features a square-rigged mainmast, foremast, and a latten-rigged Mizzen mast, along with a rounded stern, sizable bowsprit, forecastle, and aft castle.

This is a large ship, built to carry heavy freight for long-distance hauls since it was very steady even in the worst weather with the British Army calling it the “Great Ship” because of its highly-functional ship design.

Famous carrack shipping vessels are listed below.

• Santa Maria : This was the famous ship that Christopher Columbus used to sail and discover America in 1492
• Victoria : The first ship to circumnavigate the globe
• Grace Dieu : This was commissioned by King Henry V and it was one of the largest carrack ships in the world in 1418
• Cinco Chagas : This was presumed to be the richest ship at that time. it was sunk in battle in 1594 ( 5 )

3. The Brigantine

A Brigantine is a two-masted sailing ship with the main mast both a fore-and-aft main sail, a triangular type of sail and a square main topsail that came in various sizes ranging from 30 tons to 150 tons and it could carry a crew of up to 125 people but the shipping vessel could still be handled by a smaller crew if needed.

These ships were similar to the sailing vessel called the Brig as they both had top-gallant sails and were used by the Royal Navy to scout and monitor enemies on the high seas while also being popular amongst pirates as they were faster and easily maneuverable sailing vessels.

It is unclear when the ship was originally built with loose definitions date the ship back to the 13th century when it was originally referred to as the "sail and oar-driven war vessel" ( 6 ) and early academic definitions where the vessel was referred to as the "Brigantine" was first seen in books in the early to mid-16th century ( 7 ).

They would sail across the trade routes of the Baltics and Northern Europe, all the way from Germany to Scandinavia.

The mid-size ships had two sails on the-mainmast with a stripped-down fully-squared rig.

4. The Barquentine

The Barquentine, first built in the 17th century and also referred to as a " schooner barque ", " barkentine " or " schooner bark ", is a sailing ship similar to a barque but with only the foremast square-rigged and the remaining masts rigged fore and aft ( 9 ). They weighed 250 to 500 tons.

The Barquentine has three or more masts and square sails on the fore and aft masts with the main mast had topmast and gaff sails and these had been stripped down to facilitate operation by a slimmer crew and basic rig.

The Barquentine sailed the waters of Northern Europe which were dominated by variable wind speeds and they were popularly used to carry lumber from Scandinavia and Germany to England and the Baltic Areas.

5. The Xebec

The Xebec, also known as " Zebec ", a name derived from the Arabic word for "Small Ship", was a sailing ship built in the 16th to mid-19th century that was used mainly for moving cargo.

The Xebec sailing vessel held between 90 and 400 crew and was 103ft 9 inches in length with a tonnage of between 200 - 300 tons ( 10 ) and they were very agile and popular with European navies.

The features of the Xebec are listed below.

• Long-prow bulkheads
• Narrow elongated hulls
• Huge lateen yards
• One aft-set mizzen mast
• 3 lateen-pillared masts, both raked forward and having a single triangular sail

Their shallow draft and lateen rig allowed for a closer pinch to the wind allowing them to flee quickly or turn around and fire a broadside volley quickly.

After a lot of engineering experiments, the Xebec gave rise to the Polacre-Xebec, which replaced the mizzen mast. The mainmast of the new derivative also had a square rig and these new vessels were light and could not carry a heavy load with the shallow draft and low free-board making them unsuitable for open-seas sailing.

6. The Barque

The barque, also referred to as " barc " or " bark ", is a sailing ship first introduced in the 15th century ( 11 ) with 3 or more masts with square sails on all masts, except the aft or mizzen mast. It could carry approximately 500 tons and could hold a crew of 100 people.

Although they are quite similar, the barque should not be confused with the Schooner Bark which is a different vessel.

The Barque ship was commonly used by traders to carry extremely high volumes of cargo from Australia to Europe with cargo mainly consisting of Nitrates and Guano destined for the Western South American coast and they were popular in the period prior to the start of World War II.

7. The Clipper

A clipper was a sailing vessel introduced in the mid-19th century that was mainly used as a merchant ship for transporting goods and it was designed for speed.

Clipper ships ranged in size from a few hundred tons to over 4000 tons ( 12 ) and they all had a narrow build, a protruding stern, 3 to 5 masts for speed, and a square rig.

They were most commonly used by British and American traders to ship goods from China to their countries and they were also used to ferry Gold and Tea back to Great Britain and the Americas.

Famous clipper ships are listed below.

• Cisne Branco : This is a steel-hulled built like the original clipper. It is used as a training vessel by the Brazilian navy to this day
• Race Horse : This clipper ship set the record of getting from New York to San Francisco in 109 days in 1850 which was a record at that time
• Marco Polo : This clipper vessel was the first boat of the time to make around trip between England & Australia in under 6 months in 1852

8. The Windjammer

The Windjammer is a commercial sailing ship built in the 19th century with a capacity between 2,000 to 8,000 tons and the speed ranged from 14 to 21 knots ( 13 ).

It came with three to five square-rigged masts and it had a cost-effective extended hull that allowed for larger storage space.

It was a general-class merchant ship and was mainly used to transport bulky cargo and it ferried lumber, coal, and many other goods from one continent to another before evolving from carrying cargo to carrying passengers on cruises in later generations.

9. The Fluyt

The Fluyt, also known as " fleut " or " fluit " is a sailing ship that originated in the 16th century in the Dutch Republic with a weight between 200 and 300 tons, approximately 80 feet (24 meters) in length, and a crew capacity of 12 - 15 people ( 14 ).

The Fluyt has three squared-rigged masts and was primarily used as a merchant ship to transport cargo.

It was lightly fortified, had a small stern and extended box-style structure, and was crafted using specialized tools to reduce the costs of production and make them affordable to merchants.

10. The Fully-Rigged Ship

A fully rigged ship, also referred to as a "full-rigged ship", is a sailing ship with three or more masts, with all of the masts being square-rigged and the rig, hull, mast, and yards made of iron, wood, or steel.

A full-rigged ship weighed an average 325 tons and could carry a crew of up to 36 people and these ships required a larger crew because of their fully rigged construction ( 15 ).

During the 18th century, a full-rigged ship was also referred to as a " frigate " and they were mainly used for patrolling and for attacking.

A full-rigged ship weighed an average 325 tons and could carry a crew of up to 36 people ( 16 ).

However, towards the end of the 19th century, these ships were stripped down so they could be handled by a smaller crew which helped in easier handling of the sails during the monsoon period when winds would change speed and direction without any warning.

This helped in easier handling of the sails during the monsoon period when winds would change speed and direction without any warning.

A fully rigged ship masts from stern to bow consists of: ( 17 )

• Mainmast : This is the tallest mast on the ship
• Foremast : This is the second tallest mast on the ship
• Mizzenmast : This is the third tallest mast on the sailing vessel
• Jiggermast : If there is a 4th mast, it will be the jiggermast and will be the smallest mast on the ship

11. The Cutter

The cutter is a smaller sailing ship built in the early 18th century with a single mast rigged fore and aft and it varied in size from 20ft to 34 ft in length on average with a crew capacity of between 21 to 66 people ( 19 ).

A cutter sailing vessel features: ( 18 )

• Narrow hull
• 2 or more headsails
• Decked sailcraft
• Raking transom
• Vertical stem
• A gaff-rigged long bowsprit

This sailing ship was used for patrolling territorial waters and other enforcement activities during the 18th century and it was used to ferry soldiers and government officials because it was very fast and could outrun any enemy.

Modern-day cutters have a rugged appearance, are small and aptly fit into their intended purpose – speed and agility and the British Sailing Club still has open-oared cutters in their fleet of sailing ships.

12. The Yawl

A Yawl is a sailing ship that was originally that was originally a dutch ship nicknamed " Dandy " or " Jol " in Dutch built in the 19th century with a speed range from 10-14 knots, an average crew size of 25 people and a ship size ranging from 30ft to 75ft in length with beam sizes ranging from 10ft to 12ft.

They bore two fully-equipped masts and a fore-and-aft sail, a smaller jigger-mast and a mizzen mast that leans towards the rudder post of the ship with the mizzen sail in this case purposely designed to aid in balancing and trimming the ship on rough waters.

One famous yawl sailing ship is the Islander which was a 34ft yawl that Harry Pidgeon sailed around the world on. He was the second person in 1918 to sail around the world at that time.

13. The Brig

The brig is a two-masted sailing ship that was originally built in the 18th century with square rigging on both masts and sometimes had a spanker on the aft mast.

The length of a brig varied from 75ft to 165ft with tonnages up to 480 ith tonnages up to 480 and it needed a crew of 22 people ( 20 ).

The brig was used as a war vessel and a cargo ship for transporting goods and they were later used to ferry large cargo on the open seas since they could easily follow the direction of the prevailing winds.

It came with a berthing deck that had sleeping quarters for cabin crew and marine officials, storage areas, a sail bin, a wood-paneled stove room, guns, and carronades.

They would be brought into the harbor without using tugs and could maneuver well in small areas.

Famous brig ships are listed below.

• USS Argus : This was a United States Navy brig that fought in the First Barbary War, taking part in the blockage of Tripoli and the war of 1812
• USS Reprisal : This was the first ship of the United States Navy
• USS Somers : This was a brig in the United States Navy that became infamous for being the only US Navy ship to undergo a mutiny

14. The Ketch

A ketch is a two-masted sailboat that originated in the 17th century with most ketch ships ranging from 40ft to over 120ft in size and weighing between 100 and 250 tons. A ketch ship needed a smaller crew of only 4 people to operate ( 21 ).

The ketch looked just like the Yawl and as stated had two masts each having a fore-and-aft rig with the difference between the two being that the ketch had a mizzen mast placed on the taller mainmast but at a position in front of the rudder post. The mizzen in this case aided in maneuvering the vessel.

A ketch ship was used for:

• Cargo Transportation

15. The Hulk

A hulk is an 18th-century ship that is a derivative of the Carrack with a weight of 400 tons that is afloat but incapable of going to sea. In maritime terms, the name "Hulk" was given to ships that were outdated, stripped down or unprofitable to run.

The bulk of the hulk fleet was comprised of abandoned ships, stripped down and therefore could not continue to ply across the Mediterranean Sea as cargo or transport ships.

They are stationary and kept for their buoyancy and were used as a prison, a place for gambling.

• Maritime Museum Of The Atlantic. " Sailing Ship Rigs ".
• The New York Times. " America's Cup Held Here Since 1851 ", PDF.
• World History Encyclopedia. " Carrack Definition ," Paragraph 3.
• Same As Reference 3
• Military History. " Carracks, Famous Carracks ," Paragraph 9.
• " Aken, tjalken en kraken " by Hans Haalmeijer & Dirk Adrianus Vuik, Page 12.
• Google Books Ngram Viewer. " Brigantine ".
• Gaspee Info. " Brigentines Described ," Paragraph 3.
• Wikipedia. " Barquentine ," Paragraph 1.
• " Ship: 5000 Years Of Maritime Adventure " by Brian Lavery, Page 137.
• Oxford English Dictionary (Online Edition). " Barque ".
• University of Houston. " No. 338 Clipper Ship ". Paragraph 2
• Marine Insights. " Windjammer Sailing Ships: From Past to Present ". Paragraph 8
• History Today. " Dutch Shipbuilding in the Golden Age ". Volume 34, No. 1
• " The Story Of The Sea, Volume 1 " by Arthur Quiller-Couch, Page 20.
• Whaling Museum. " Rigs Of Vessel, Ship ," Paragraph 1.
• " A Dictionary of Sea Terms " by Anstead, A, Page 96.
• Britannia. " Cutter, Sailing Craft ". Paragraph 1.
• " The Boats Of Men Of War " by William May & Simon Stephens
• Texas Navy Association. " Glossary Of Nautical Terms ". Page 1
• National Museum Of American History. " Ship Model, Ketch ". Paragraph 1

Welcome aboard the sailing yacht Atlantic

All about one of the most awesome classic yachts of all time, the three mast schooner Atlantic. Long time holder of the world record for the crossing of the Atlantic Ocean under sail, this one hundred and eighty-five foot schooner originally designed by William Gardner in 1903 has been relaunched and is sailing once more.

The Atlantic is currently in the western Mediterranean, and available for luxury sailing yacht charters.

• 3D Printing
• Scale Modeller of the Month

Belem Ship – History of the French Three-Masted Barque

• Pinterest 0

Classified as a Historical Monument in 1984, nowadays the Belem ship is used for civilian training. But with more than 120 years on the open seas, there is much more to this ship than meets the eye. Read on to discover the diverse history and heritage of this famous French ship!

The merchant ship’s narrow escape

Built in 1896 at the request of Fernand Crouan, the Belem was used as a merchant ship until 1914, transporting sugar, cocoa, and coffee from the West Indies, Brazil and French Guiana to Nantes, France. On 8 May, 1902, the Belem and its crew were fortunate to escape disaster when Mount Pelée erupted in Saint-Pierre, Martinique. Arriving before the major eruption, there were too many vessels already occupying the roadsteads. Annoyed at having nowhere to anchor, Captain Julien Chauvelon anchored the three-master miles away instead. This move saved them from the deadliest eruption of the 20th century, which claimed approximately 29,000 lives.

A luxurious transformation

When World War I commenced, a lot of the world’s commercial ships were destroyed. But not the Belem. No, it traded a terrible fate for something much better when it was sold to the 2nd Duke of Westminster, Hugh Grosvenor. With a few choice modifications, including the addition of two auxiliary 300HP Bolinder Diesel engines and Victorian balusters, the Belem was transformed into Grosvenor’s elegant pleasure yacht.

The Guinness world tour

The three-masted ship changed hands again in 1922, purchased by Sir Ernest Guinness, technical expert of the Guinness family directors at Guinness brewery. After renaming her the Fantôme II and revising the rig, Guinness was joined by his daughters Maureen, Oonagh, and Aileen in 1923 on a tour of the seven seas. They travelled across the globe using the Suez and Panama Canals, sailing under a British flag. With World War II fast approaching, the ship was moored in Cowes, Isle of Wight, where it remained even after Sir Guinness’ passing in 1949.

Italian ownership and adjustments

Two years later, the Belem (then the Fantôme II) was purchased from Sir Ernest Guinness’ heirs by Venezian count Vittorio Cini. He renamed her the Giorgio Cini after his late son, who died in a tragic plane crash in 1949 near Cannes. With visions of using the ship for maritime training, Cini had her refitted as a barquentine, with its interiors remodified to allow for a larger accommodation of students. The Giorgio Cini was used successfully as a training ship until 1965, at which point she was deemed too old for practical use and was moored on the Island of San Giorgio Maggiore, Venice.

In 1972, the Italian Caribinieri sought to restore the ship to a barque rig, but the efforts proved too costly and the Giorgio Cini became the shipyard’s property. Four years later she was successfully converted to a barque. In 1979, the three-masted ship was sold back to the French and made a triumphant return to her original home port of Nantes, where it was renamed the Belem in honor of its rich heritage. It has been used as a sailing ship ever since, and also serves as a French ambassador and sailing museum, attracting more than 40,000 visitors per year. 

Though she underwent many physical and name changes, the Belem’s spirit has remained strong since its maiden voyage in the 19th century. It may not have the same prestige or recognition as other French ships such as the Soleil Royal , but it remains an important part of not only France’s maritime history, but indeed, the world’s. Our 1:75 scale Belem ship is a beautiful large scale replica that’s ideal for any ship lover – order your full kit now and capture its wonderful history in your own home!

RELATED ARTICLES MORE FROM AUTHOR

Ships at the Battle of Trafalgar

Knight Rider Car – The History and Features of K.I.T.T.

American Stagecoach: History of this Early Vehicle

No comments, leave a reply cancel reply.

POPULAR POSTS

Valentino Rossi bikes collection

Volkswagen vans old models from 60’s and 70’s

Tips and Tricks for Building Model Cars

Stay connected.

© 2024 De Agostini UK Ltd

• International Delivery
• Cancellation
• Ask our community
• Why ModelSpace?
• Privacy & Cookie Policy
• Acceptable Use Policy
• Terms & Conditions
• Google plus

© 2024 De Agostini UK L td

Accept our cookies for an optimal customer experience.

Three-masted barque

• Related ships

Robust and original

The three-masted Artemis is an astonishing example of nautical tradition. The ship was built in Norway in 1926 for whale fishing. Later on it was used as a cargo ship between Asia and South America.

The Artemis is sailing since 2001 on the North European waters to honour the glory of the Dutch sailing fleet! The Frisian Tall Ship Company bought the Artemis at the end of the last century and built it with a lot of love and a sense of detail back into a stunningly sailing ship. Now she crosses the seas to historic port cities or to one of the many nautical events.

Robust and original, that is the appearance of the Artemis. At the same time, the ship offers high comfort and luxury. It is precisely this combination that makes the ship unique and loved by international events and sea voyages. The barque has an attractive maritime salon with bar and a small hotel kitchen.

The Artemis can accommodate up to 120 people. Her guests can look forward to experienced and enthusiastic service staff and excellent catering. And of course, on a great nautical experience aboard on this unique three-master with a driven sailing crew, the most modern navigation equipment and fully prescribed safety equipment for the big voyage.

Welcome to the rich history of the Dutch sailing heritage. Welcome to the Artemis!

the Netherlands

Speed under sail

Construction year

Visited sail amsterdam

Want to stay up to date?

You will sail on the front row with the latest news on ships, projects and program details!

Wisconsin maritime historians discover steam tug hidden in Lake Michigan since 1895

On the morning of Sept. 13, Brendon Baillod and Bob Jaeck set out on a three-day mission to find the John Evenson, a wood steam tug that sank in 1895.

The Evenson's whereabouts have eluded people ever since. Decades ago, a local dive club even offered a $500 reward to find it.

For years before their mission, the two maritime historians from the Wisconsin Underwater Archeology Association had collected various historical documents on the steam tug, as well as the wreck report by the Evenson's captain. The accounts helped them narrow their search to a few miles northeast of Algoma, Wisconsin.

When Baillod and Jaeck got to the search site that morning, Lake Michigan's waves were rough — almost too rough to use their sonar equipment. And they realized that the water was about 15 feet deeper than they thought it would be. The pair turned to the south, pointing the stern to the waves, and went below deck to rethink their search grid.

Five minutes later, and roughly a quarter mile from the search grid, a huge steam boiler showed up on screen.

Baillod and Jaeck turned to each other, both "gobsmacked."

"It was almost like the wreck wanted to be found," Baillod said.

The remains of the John Evenson, a wooden steam tug built in Milwaukee lie five miles northeast of Algoma, 50 feet below the water's surface.

After they spotted the boat, the two maritime historians deployed a remote operated vehicle, which revealed the tug's giant propellor, steam engine and the hull-bed with most of the ship's machinery, offering a look at the steam technology used the late 1800s.

It reflects a moment in Milwaukee's history, as well as Door County's, Baillod said.

A piece of Milwaukee history hidden for 130 years

The steam tug and the man it honored had been on Baillod's mind for decades.

John Evenson was an important man in the Milwaukee maritime community in the late 1800s, Baillod explained. He was the captain of the U.S. Life-Saving Service Station in the 1870s and '80s.

He died when he was 40, leaving behind a wife and three children.

The tug, built by Evenson in Milwaukee in 1884 , was sold to George Spear, who moved it to Door County so it could be used in the lumber trade to tow log rafts. It was purchased in 1890 by brothers John and Alexander Laurie to tow vessels and barges, or scows filled with stone from nearby quarries, in Green Bay and Sturgeon Bay. John Laurie was the captain when the Evenson sank.

In the afternoon of June 5, 1895, while helping the steambarge I.W. Stephenson enter the Sturgeon Bay Ship Canal, the John Evenson got too close while attaching a line and was struck by the Stephenson. The tug capsized and sank immediately. Four members of the crew were rescued. Martin Boswell, the tug's fireman, was below deck and was carried down with the vessel.

More: We know more about the surface of Mars than about the floor of Lake Michigan. But what we do know is remarkable.

'It never gets old'

This is not the first time the maritime historians have made significant discoveries.

In 2023, Baillod and Jaeck located the intact remains of the 138-foot canal schooner Trinidad off Algoma. The schooner sank on May 5, 1881, after it sprung a leak heading south to Milwaukee. No lives were lost, except for the ship's mascot — a Newfoundland dog who was asleep in a cabin.

The Trinidad was one of 13 shipwrecks discovered in Wisconsin's Lake Michigan waters last year − smashing previous years' records.

Earlier this year, the pair discovered the Margaret A. Muir . The 130-foot, three-masted schooner sank on Sept. 30, 1893 after taking on water from a massive wave. The remains lie off Algoma as well.

Even after three decades, finding a new shipwreck like the John Evenson is special.

"It never gets old, it's always exciting," Baillod said.

More: Scientists just discovered cold, dark sinkholes in Lake Michigan. What's living in them?

More: Wisconsin’s national marine sanctuary is a museum beneath the water. Here’s what to know.

Caitlin Looby is a Report for America corps member who writes about the environment and the Great Lakes. Reach her at [email protected] or follow her on X @caitlooby .

Please consider supporting journalism that informs our democracy with a tax-deductible gift to this reporting effort at jsonline.com/RFA or by check made out to The GroundTruth Project with subject line Report for America Milwaukee Journal Sentinel Campaign. Address: The GroundTruth Project, Lockbox Services, 9450 SW Gemini Dr, PMB 46837, Beaverton, Oregon 97008-7105.